5950-00-239-7547
Power Transformer
Find complete technical information, availability, and procurement data for NSN 5950-00-239-7547 All details are based on official government and industry records to support accurate and compliant procurement.
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5950 코일 및 변압기
국가 재고 번호
5950-00-239-7547
품목 이름 코드
32496
배정 날짜
10/31/1969 (56년 전)
1.672 inches minimum and 1.704 inches maximum single mounting facility 2nd center group center to center distance between mounting facilities parallel to width, 3.109 inches minimum and 3.141 inches maximum single mounting facility 2nd center group center to center distance between mounting facilities parallel to length, not established reliability indicator, 1.552 inches minimum and 1.572 inches maximum single mounting facility 4th center group center to center distance between mounting facilities parallel to length, 3.109 inches minimum and 3.141 inches maximum single mounting facility 3rd center group center to center distance between mounting facilities parallel to length
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- Reliability 지시자
- not established
- Center To Center Distance Between Mounting Facilities Parallel To Length(장착 시설 사이의 중심 간 거리: 길이에 평행)
- 3.109 inches minimum and 3.141 inches maximum single mounting facility 2nd center group
- Center To Center Distance Between Mounting Facilities Parallel To Length(장착 시설 사이의 중심 간 거리: 길이에 평행)
- 3.109 inches minimum and 3.141 inches maximum single mounting facility 3rd center group
- Center To Center Distance Between Mounting Facilities Parallel To Length(장착 시설 사이의 중심 간 거리: 길이에 평행)
- 1.552 inches minimum and 1.572 inches maximum single mounting facility 4th center group
- Center To Center Distance Between Mounting Facilities Parallel To Width
- 1.672 inches minimum and 1.704 inches maximum single mounting facility 2nd center group
- Center To Center Distance Between Mounting Facilities Parallel To Width
- 1.672 inches minimum and 1.704 inches maximum single mounting facility 3rd center group
- Center To Center Distance Between Mounting Facilities Parallel To Width
- 0.990 inches minimum and 1.010 inches maximum single mounting facility 4th center group
- 전체 높이
- 1.859 inches minimum and 1.891 inches maximum
- 빈도 등급
- 400.0 hertz nominal single component
- 입력-출력 위상 관계(Input-Output Phase Relationship)
- three phase to single phase and three phase to three phase single component
- 변압기 권선 연결 유형
- wye-delta
- 연락처 제품 설명
- internal shield brought out to terminal single component
- 본체 길이
- 3.859 inches minimum and 3.891 inches maximum
- 몸 폭
- 2.172 inches minimum and 2.204 inches maximum
- 최대 작동 온도
- 170.0 celsius
- 설치 시설 사이 거리
- 1.109 inches minimum and 1.141 inches maximum single mounting facility 1st center group
- 관련 상품
- fully inclosed
- 설치 시설 수량
- 2 1st group
- 설치 시설 수량
- 4 2nd group
- 설치 시설 수량
- 4 3rd group
- 설치 시설 수량
- 4 4th group
- 설치 방법
- threaded hole all groupings
- 감기 기능 그리고 양
- 2 primary and 6 secondary single component
- 공칭 나사 크기
- 0.112 inches 2nd group
- 공칭 나사 크기
- 0.112 inches 3rd group
- 공칭 나사 크기
- 0.138 inches 1st group
- 공칭 나사 크기
- 0.164 inches 4th group
- 감기 작동 현재
- 600.0 milliamperes ac nominal single component 4th secondary
- 감기 작동 현재
- 40.0 milliamperes ac nominal single component 2nd secondary
- 감기 작동 현재
- 40.0 milliamperes ac nominal single component 3rd secondary
- 감기 작동 현재
- 84.0 milliamperes ac nominal single component 1st secondary
- 공급 능력
- 41.52 volts-amperes single component 2nd secondary
- 공급 능력
- 5.46 volts-amperes single component 1st secondary
- 공급 능력
- 1.6 volts-amperes single component 3rd secondary
- 공급 능력
- 1.8 volts-amperes single component 4th secondary
- 감기 운영 전압
- 1.038 ac kilovolts nominal single component 2nd secondary
- 감기 운영 전압
- 3.00 ac volts nominal single component 4th secondary
- 감기 운영 전압
- 65.00 ac volts nominal single component 1st secondary
- 감기 운영 전압
- 39.20 ac volts nominal single component 1st primary
- 감기 운영 전압
- 40.00 ac volts nominal single component 3rd secondary
- 감기 운영 전압
- 8.00 ac volts nominal single component 2nd primary
- 특별 기능
- two primary windings; six secondary windings
- 테스트 데이터 문서
- 04660-73c828 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
- 나사 시리즈 지정자
- unc all groupings
- 끝 유형과 양
- 25 turret
관련 부품 및 사양
이 NSN에는 특정 운영 요구에 맞게 설계된 다양한 관련 부품이 포함되어 있습니다. 아래의 각 항목을 검토하여 올바른 적용 및 교체를 위한 심층적인 사양, 기능 세부 정보 및 지침을 찾으십시오.
| 부품 번호 | 이름 |
|---|---|
| 73C828-004 | Power Transformer |
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- 1 - Full descriptive item identification
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A058B0
- A - Item does not contain precious metal.
- 0032496
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- KE
- 063420
- Z
- 35355
- W - Rating variable
- 595 - Transformer, (machinery and parts),(less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- transformers,noi,or transformer par
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 5950-00-239-7547
What is the FSCG of the NSN 5950-00-239-7547?
The FSCG of the NSN 5950-00-239-7547 is 5950
Does NSN 5950-00-239-7547 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5950-00-239-7547 contain precious materials?
Item does not contain precious metal.
Does NSN 5950-00-239-7547 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5950-00-239-7547 was assigned to the Federal Catalog?
It was assigned 56년 전, on Fri, Oct 31, 1969
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.
FREE
