Sleeve Bearing Half
10A4868
(NSN) National Stock Number
3120-00-374-9714
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
22210
Schedule B Code
8483308090
Summary
0.2400 inches minimum and 0.2600 inches maximum first hole diameter, 2.2490 inches minimum and 2.2510 inches maximum overall length, 3.0670 inches nominal body outside diameter, 2.8764 inches minimum and 2.8794 inches maximum body inside diameter, 3.8770 inches minimum and 3.9710 inches maximum left flange outside diameter, 3.8770 inches minimum and 3.9710 inches maximum right flange outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
A half of a two-piece split type bearing, sleeve.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22210 | A045A0 | - | 1 |
Specifications
Hole Diameter
0.2400 inches minimum and 0.2600 inches maximum first
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Overall Length
2.2490 inches minimum and 2.2510 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
3.0670 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
2.8764 inches minimum and 2.8794 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Left Flange Outside Diameter
3.8770 inches minimum and 3.9710 inches maximum
Details
None.Right Flange Outside Diameter
3.8770 inches minimum and 3.9710 inches maximum
Details
None.Left Flange Width
0.1010 inches minimum and 0.1030 inches maximum
Details
None.Right Flange Width
0.1010 inches minimum and 0.1030 inches maximum
Details
None.Distance From Centerline Of Opening To Left End Of Bearing
1.1140 inches minimum and 1.1360 inches maximum first
Details
The distance,measured along a straight line parallel to the longitudinal axis of the bearing,from the center of the aperture to the left end of the bearing.Lubricant Accommodation Style
grooved circular
Details
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.Locking Lug Height
0.0450 inches minimum and 0.0550 inches maximum
Details
A measurement from the outer surface of an item to the outermost point of the locking lug.Locking Lug Length
0.1900 inches minimum and 0.2200 inches maximum
Details
The distance,measured along a straight line parallel to the longitudinal axis of the lug,from one edge to the other.Locking Lug Width
0.1750 inches minimum and 0.1800 inches maximum
Details
The distance,measured along a straight line,perpendicular to the longitudinal axis of the lug,from one edge to the other.Corner Shape
round inside left corner
Details
The physical configuration of the corner.Corner Shape
round inside right corner
Details
The physical configuration of the corner.Corner Shape
round right flange body corner
Details
The physical configuration of the corner.Corner Shape
round left flange body corner
Details
The physical configuration of the corner.Corner Shape
square outside left corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Corner Shape
square outside right corner
Details
The physical configuration of the corner.Corner Shape
square right flange outside left corner
Details
The physical configuration of the corner.Antirotation/Lubrication Type And Quantity
2 hole
Details
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.Hole Spacing Angle
35.0 degrees nominal
Details
The angle formed by the centerline of the bearing and the centerline of two holes not in the same plane.Surface Groove Location And Quantity
1 internal
Details
Indicates the location and number of grooves on the surface of the item.Distance From Lug End To End Of Bearing
0.4435 inches minimum and 0.4530 inches maximum
Details
None.Material
copper alloy inner layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 1010 outer layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
66 fed std single material response outer layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
sae 49 assn std single material response inner layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
tin overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Style Designator
half sleeve, external flanges both ends
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| MS13965-1 | 96906 | E | - | 2 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58880 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT INC
CAGE: 81240
HOPKINS
, MN
, 55305
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3120-00-374-9714
What is the NIIN of the NSN 3120-00-374-9714?
The National Item Identification Number (NIIN) of the NSN 3120-00-374-9714 is 00-374-9714
When the NSN 3120-00-374-9714 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 3120-00-374-9714 contain any precious metals?
Does not contain precious metal
Does the NSN 3120-00-374-9714 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products