Transmitter Synchro
EAS306
(NSN) National Stock Number
5990-00-008-8466
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round c body style, 0.8113 inches minimum and 0.8123 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.6010 inches minimum and 1.6310 inches maximum overall length, 0.9360 inches minimum and 0.9370 inches maximum flange diameter, 0.0620 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.8113 inches minimum and 0.8123 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.6010 inches minimum and 1.6310 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.9360 inches minimum and 0.9370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0620 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9320 inches minimum and 0.9420 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.0895 inches minimum and 0.0900 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3600 inches minimum and 0.3900 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
10
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
49.0 milliamperes maximum
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
328.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
162.20 minimum and 220.80 maximum
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
34.00 minimum and 46.00 maximum
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Rotor Dc Resistance In Ohms
134.00 minimum and 186.00 maximum
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
36.00 minimum and 54.00 maximum
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
15.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Total Null Voltage Output In Millivolts Per Volt
40.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Pilot Length
0.0330 inches minimum and 0.0430 inches maximum
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0570 inches minimum and 0.0670 inches maximum
Details
None.Mounting Surface To Terminal End Distance
1.2410 inches maximum
Details
None.Body Material
steel corrosion resisting
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
525.75 minimum and 664.25 maximum
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0250 inches minimum and 0.0350 inches maximum single shaft
Details
None.Plus J Zso Reactance In Ohms
89.25 minimum and 120.75 maximum
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0150 inches minimum and 0.0200 inches maximum single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.454 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| CGH10AS5B718 | 90316 | 5 | - | C | 1 | - | ZZ |
| CGH10AS5B718 | 99932 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
MISSION SYSTEMS DAVENPORT INC. DBA MISSION SYSTEMS AAR
CAGE: 99251
DAVENPORT
, IA
, 52804-1203
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-008-8466
What is the NIIN of the NSN 5990-00-008-8466?
The National Item Identification Number (NIIN) of the NSN 5990-00-008-8466 is 00-008-8466
When the NSN 5990-00-008-8466 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Jul 23, 1972
Does the NSN 5990-00-008-8466 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-008-8466 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products