Thermostatic Switch

28NP/NC/200DEGF/SOLDER SEAL

(NSN) National Stock Number

5930-00-237-2635

Federal Supply Classification

5930 Switches

Item Name Code

00451

Schedule B Code

9032100000

Summary

1.250 inches maximum overall length, 0.688 inches maximum overall height, 0.750 inches maximum body diameter, 0.500 inches maximum body height, 0.930 inches minimum and 0.944 inches maximum distance between mounting facility centers, internal sensor temp sensing element type

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	ZZ

Identification

A switch that is actuated by changes in ambient temperature. Excludes:circuit breaker; control, temperature (as modified); fuse (as modified); protector, thermal-overload, electrical motor; relay, thermal; and thermostat, flow control. See also control, temperature (as modified) and regulator, temperature (as modified).

INC	FIIG	Concept	Condition
00451	A048B0	1	1

Specifications

Overall Length

1.250 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Overall Height

0.688 inches maximum

Details

The distance measured in a straight line from the bottom to the top of an item.

Body Diameter

0.750 inches maximum

Details

The length of a straight line which passes through the center of the body,and terminates at the circumference.

Body Height

0.500 inches maximum

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Distance Between Mounting Facility Centers

0.930 inches minimum and 0.944 inches maximum

Details

The distance between mounting facility centers.

Temp Sensing Element Type

internal sensor

Details

Indicates the type of sensor or transducer used in the item to convert temperature changes to switch actuating force.

Operating Temp Rating

-65.0 deg fahrenheit minimum and 185.0 deg fahrenheit maximum

Details

The temperature at which the item operates.

Mounting Method

bracket

Details

The means of attaching the item.

Contact Action Stimulus

increase

Details

An indication of whether the initial action of the contacts occurs as the result of an increase or decrease in stimulus.

Mounting Facility Pattern

two position in-line

Details

The general configuration and relative position of the facilities provided for mounting the item.

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Details

The designation that identifies the electrical configuration of a nonpile-up contact group including the number of switching poles or forms.

Terminal Type

tab, solder lug

Details

Indicates the type of terminal for providing electrical connection to the item.

Contact Load Current Rating

1.0 amperes resistive load first voltage

Details

The amount of current that the contacts are rated to make or break with a specified load.

Contact Load Current Rating

3.0 amperes resistive load second voltage

Details

The amount of current that the contacts are rated to make or break with a specified load.

Contact Adjustability

deactuation point not adjustable and actuation point not adjustable

Details

The adjustability of the contact.

Contact Stimulus Rating

190.00 actuation point minimum degrees fahrenheit and 210.00 actuation point maximum degrees fahrenheit and 90.00 deactuation point minimum degrees fahrenheit and 110.00 deactuation point maximum degrees fahrenheit and 100.00 differential point nominal degrees fahrenheit

Details

The rating of the stimulus required to actuate and/or deactuate the contact(s).

Contact Voltage Rating In Volts

125.0 ac at sea level first voltage

Details

The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.

Contact Voltage Rating In Volts

30.0 dc at sea level second voltage

Details

The voltage for which the contact(s) is rated at sea level or at a specified altitude,expressed in volts.

Frequency In Hertz

60.0 single voltage

Details

The cycles per second /hertz/ of the alternating current.

Media For Which Designed

gas

Details

The type of media for which the item is designed.

Style Designator

disc w/flange

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

18876-10112577 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
10112577-004	18876	A	-	3	2	-	TX
11041-180-2	82647	5	-	5	2	-	TX
4286A12-150	82647	5	-	5	1	-	TX
4344-184-39	82647	5	-	5	1	-	TX
VE-3101 OR 200DEGF/FACTORY SEAL	93929	5	-	5	9	-	ZZ
VE1049	93929	5	-	5	9	-	TX
32400-0-200	73168	5	-	3	2	-	ZZ
3100-58-4	14604	5	-	5	1	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
35205	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Provided with every order

Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.

Counterfeit Parts Prevention
100% Product Inspections
7 Year Record Retention
On Time Delivery
HAZMAT Certified
Worldwide Shipping

Manufacturer

ULANET GEORGE CO

CAGE: 74389

NEWARK , NJ , 07105

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5930-00-237-2635

What is the NIIN of the NSN 5930-00-237-2635?

The National Item Identification Number (NIIN) of the NSN 5930-00-237-2635 is 00-237-2635

When the NSN 5930-00-237-2635 was assigned to the Federal Catalog?

It was assigned 54 years ago, on Wed, Nov 4, 1970

Does the NSN 5930-00-237-2635 contain any precious metals?

Type/content is unknown

Does the NSN 5930-00-237-2635 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.