Ship Propulsion Shaft
AFS1-203-2072171
(NSN) National Stock Number
2010-00-089-5668
Federal Supply Classification
2010 Ship and Boat Propulsion Components
Item Name Code
03044
Schedule B Code
8409996000
Summary
5.688 inches minimum and 5.750 inches maximum width, 54.604 feet nominal overall length, 28.000 inches nominal outside diameter, 3.833 feet nominal taper length, 29.000 inches nominal taper major diameter, 1.687 inches nominal depth
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03044 | T08000 | 1 | 1 |
Specifications
Width
5.688 inches minimum and 5.750 inches maximum
Details
A measurement taken at right angles to the length of an item,in distinction from thickness.Overall Length
54.604 feet nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Outside Diameter
28.000 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Taper Length
3.833 feet nominal
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Major Diameter
29.000 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.Depth
1.687 inches nominal
Details
A linear measurement from the surface to a specified inner point on an item,in distinction from height.Surface Finish
smooth machined
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Usage Design
suitable for afs1 and 2
Details
Indicates the designed use of the item.Unit Type
propeller shaft section
Details
Indicates the type of unit.Protective Covering Type
rubber
Details
Indicates the type of protective covering provided.Usage Location
center
Details
Indicates the location at which the item is to be used.Forward End Coupling Design
integral
Details
The design of the forward end coupling.Forward End Coupling Outside Diameter
37.515 inches nominal
Details
The length of a straight line which passes through the center of the forward end coupling,and terminates at the outside circumference.Forward End Coupling Length
5.771 feet nominal
Details
A measurement of the longest dimension of the forward end coupling,in distinction from width.Forward End Coupling Thickness
4.500 inches nominal
Details
A measurement of the smallest dimension of the forward end coupling,in distinction from length or width.After End Design
tapered
Details
The design of the after end.Forward Bearing Sleeve Outside Diameter
31.875 inches nominal
Details
The length of a straight line which passes through the center of the forward bearing sleeve,and terminates at the outside circumference.Forward Bearing Sleeve Length
7.714 feet nominal
Details
A measurement of the longest dimension of the forward bearing sleeve,in distinction from width.After Bearing Sleeve Outside Diameter
31.750 inches nominal
Details
The length of a straight line which passes through the center of the after bearing sleeve,and terminates at the outside circumference.After Bearing Sleeve Length
10.364 feet nominal
Details
A measurement of the longest dimension of the after bearing sleeve,in distinction from width.Covering Location
surfaces between bearing sleeve covered
Details
Indicates the location on an item to which a covering has been applied.Construction
solid
Details
The structural characteristic of the item.Taper
1.000 per foot in inches nominal
Details
The amount of taper of the item.Material
steel
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Quantity
2
Details
A numeric value which represents a positive whole value without regard to any unit of measure.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 330-203-04PC1 | 81220 | 1 | - | 5 | 9 | - | HD |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65760 | - | M | M |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 810 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 2010-00-089-5668
What is the NIIN of the NSN 2010-00-089-5668?
The National Item Identification Number (NIIN) of the NSN 2010-00-089-5668 is 00-089-5668
When the NSN 2010-00-089-5668 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 2010-00-089-5668 contain any precious metals?
Type/content is unknown
Does the NSN 2010-00-089-5668 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products