Ship Propulsion Shaft
2186760
(NSN) National Stock Number
2010-00-068-7520
Federal Supply Classification
2010 Ship and Boat Propulsion Components
Item Name Code
03044
Schedule B Code
8409996000
Summary
7.500 inches nominal major diameter, 7.000 inches thread length, 2.498 inches nominal width, 34.593 feet nominal overall length, 11.625 inches nominal outside diameter, 1.667 feet nominal taper length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HW |
Identification
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03044 | T08000 | 1 | 1 |
Specifications
Major Diameter
7.500 inches nominal
Details
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.Thread Length
7.000 inches
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Width
2.498 inches nominal
Details
A measurement taken at right angles to the length of an item,in distinction from thickness.Overall Length
34.593 feet nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Outside Diameter
11.625 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Taper Length
1.667 feet nominal
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Major Diameter
11.625 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.Keyway Width
1.375 inches nominal and 1.437 inches nominal
Details
A measurement taken at right angles to the length of a keyway,in distinction from thickness.Keyway Depth
0.547 inches nominal and 0.551 inches nominal
Details
A measurement from the top surface to the bottom of the keyway groove.Depth
0.896 inches nominal
Details
A linear measurement from the surface to a specified inner point on an item,in distinction from height.Keyway Quantity
3 and 1
Details
The number of keyways contained in or on the item.Surface Finish
smooth machined
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Usage Design
t-ags 26,27
Details
Indicates the designed use of the item.Unit Type
propeller shaft section
Details
Indicates the type of unit.Protective Covering Type
rubber
Details
Indicates the type of protective covering provided.Usage Location
center
Details
Indicates the location at which the item is to be used.Forward End Design
tapered
Details
The design of the forward end.Forward End Coupling Design
detachable
Details
The design of the forward end coupling.Forward End Coupling Type
flange
Details
Indicates the type of forward end coupling provided.Forward End Coupling Outside Diameter
12.000 inches nominal
Details
The length of a straight line which passes through the center of the forward end coupling,and terminates at the outside circumference.Forward End Coupling Length
0.781 feet nominal
Details
A measurement of the longest dimension of the forward end coupling,in distinction from width.Forward End Coupling Thickness
4.688 inches nominal
Details
A measurement of the smallest dimension of the forward end coupling,in distinction from length or width.Forward End Taper Length
0.812 feet nominal
Details
A measurement of the longest dimension of the tapered portion of the forward end,in distinction from width.After End Design
tapered
Details
The design of the after end.Forward Bearing Sleeve Outside Diameter
13.063 inches nominal
Details
The length of a straight line which passes through the center of the forward bearing sleeve,and terminates at the outside circumference.Forward Bearing Sleeve Length
4.583 feet nominal
Details
A measurement of the longest dimension of the forward bearing sleeve,in distinction from width.After Bearing Sleeve Outside Diameter
13.063 inches nominal
Details
The length of a straight line which passes through the center of the after bearing sleeve,and terminates at the outside circumference.After Bearing Sleeve Length
4.917 feet nominal
Details
A measurement of the longest dimension of the after bearing sleeve,in distinction from width.Covering Location
surface between bearing sleeves covered
Details
Indicates the location on an item to which a covering has been applied.Forward End Taper Major Diameter
10.250 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the forward end tapered portion,and terminates at the circumference.Construction
solid
Details
The structural characteristic of the item.Thread Quantity
4 per inch
Details
The number of threads per specific measurement scale.Taper
1.000 per foot in inches nominal
Details
The amount of taper of the item.Forward End Taper
0.125 per foot in inches nominal
Details
The amount of taper of the forward end of the item.Material
steel
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
abs, grade 2, forged assn std single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Quantity
1
Details
A numeric value which represents a positive whole value without regard to any unit of measure.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| AGS 26-203-2187760D | 25390 | 5 | - | 5 | 1 | - | HW |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65760 | - | M | M |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 810 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 2010-00-068-7520
What is the NIIN of the NSN 2010-00-068-7520?
The National Item Identification Number (NIIN) of the NSN 2010-00-068-7520 is 00-068-7520
When the NSN 2010-00-068-7520 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Thu, Jul 13, 1967
Does the NSN 2010-00-068-7520 contain any precious metals?
Does not contain precious metal
Does the NSN 2010-00-068-7520 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products