Ship Propulsion Shaft
AS33-203-1908014
(NSN) National Stock Number
2010-00-068-0224
Federal Supply Classification
2010 Ship and Boat Propulsion Components
Item Name Code
03044
Schedule B Code
8409996000
Summary
6.000 inches nominal inside diameter, 14.000 inches nominal major diameter, 11.500 inches thread length, 4.250 inches minimum and 4.312 inches maximum width, 37.000 feet nominal overall length, 23.000 inches nominal outside diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03044 | T08000 | 1 | 1 |
Specifications
Inside Diameter
6.000 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Major Diameter
14.000 inches nominal
Details
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.Thread Length
11.500 inches
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Width
4.250 inches minimum and 4.312 inches maximum
Details
A measurement taken at right angles to the length of an item,in distinction from thickness.Overall Length
37.000 feet nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Outside Diameter
23.000 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Taper Length
3.500 feet nominal
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Major Diameter
23.125 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.Depth
1.625 inches nominal
Details
A linear measurement from the surface to a specified inner point on an item,in distinction from height.Surface Finish
smooth machined
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Unit Type
propeller shaft section
Details
Indicates the type of unit.Protective Covering Type
resin, epoxy
Details
Indicates the type of protective covering provided.Usage Location
center
Details
Indicates the location at which the item is to be used.Forward End Coupling Design
integral
Details
The design of the forward end coupling.Forward End Coupling Outside Diameter
37.250 inches nominal
Details
The length of a straight line which passes through the center of the forward end coupling,and terminates at the outside circumference.Forward End Coupling Length
1.281 feet nominal
Details
A measurement of the longest dimension of the forward end coupling,in distinction from width.Forward End Coupling Thickness
4.625 inches nominal
Details
A measurement of the smallest dimension of the forward end coupling,in distinction from length or width.After End Design
tapered
Details
The design of the after end.After Bearing Sleeve Outside Diameter
24.750 inches nominal
Details
The length of a straight line which passes through the center of the after bearing sleeve,and terminates at the outside circumference.After Bearing Sleeve Length
8.000 feet nominal
Details
A measurement of the longest dimension of the after bearing sleeve,in distinction from width.Covering Location
all exposed surfaces
Details
Indicates the location on an item to which a covering has been applied.Construction
hollow
Details
The structural characteristic of the item.Thread Quantity
4 per inch
Details
The number of threads per specific measurement scale.Taper
1.000 per foot in inches nominal
Details
The amount of taper of the item.Material
steel
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Quantity
2
Details
A numeric value which represents a positive whole value without regard to any unit of measure.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| AS33-203-1908014 | 1F460 | 5 | - | 5 | 2 | - | HD |
| AS33-203-1908014 | 07243 | 5 | - | 5 | 2 | - | HD |
| AS33-203-1908014 | 3A6V1 | 5 | - | 5 | 2 | - | HD |
| AS33-203-1908014 | 4E769 | 5 | - | 5 | 2 | - | HD |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65760 | - | M | M |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 810 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 2010-00-068-0224
What is the NIIN of the NSN 2010-00-068-0224?
The National Item Identification Number (NIIN) of the NSN 2010-00-068-0224 is 00-068-0224
When the NSN 2010-00-068-0224 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 2010-00-068-0224 contain any precious metals?
Type/content is unknown
Does the NSN 2010-00-068-0224 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products