Ship Propulsion Shaft
UB1PC1
(NSN) National Stock Number
2010-00-051-1345
Federal Supply Classification
2010 Ship and Boat Propulsion Components
Item Name Code
03044
Schedule B Code
8409996000
Summary
1.125 inches nominal major diameter, 2.000 inches thread length, 0.375 inches nominal width, 8.709 feet nominal overall length, 1.500 inches nominal outside diameter, 0.354 feet nominal taper length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03044 | T08000 | 1 | 1 |
Specifications
Major Diameter
1.125 inches nominal
Details
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.Thread Length
2.000 inches
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Width
0.375 inches nominal
Details
A measurement taken at right angles to the length of an item,in distinction from thickness.Overall Length
8.709 feet nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Outside Diameter
1.500 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.Taper Length
0.354 feet nominal
Details
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.Taper Major Diameter
1.500 inches nominal
Details
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.Keyway Width
0.375 inches nominal
Details
A measurement taken at right angles to the length of a keyway,in distinction from thickness.Keyway Depth
0.187 inches nominal
Details
A measurement from the top surface to the bottom of the keyway groove.Depth
0.187 inches nominal
Details
A linear measurement from the surface to a specified inner point on an item,in distinction from height.Keyway Quantity
1
Details
The number of keyways contained in or on the item.Surface Finish
smooth machined
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Unit Type
propeller shaft section
Details
Indicates the type of unit.Forward End Design
straight
Details
The design of the forward end.Forward End Diameter
1.500 inches nominal
Details
The length of a straight line which passes through the center of the forward end,and terminates at the circumference.After End Design
tapered
Details
The design of the after end.Construction
solid
Details
The structural characteristic of the item.Thread Quantity
7 per inch
Details
The number of threads per specific measurement scale.Taper
0.750 per foot in inches nominal
Details
The amount of taper of the item.Material
copper alloy
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
asth,designation 821,forged assn std single material response
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Quantity
1
Details
A numeric value which represents a positive whole value without regard to any unit of measure.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 2010-00-051-1345 | 32877 | 6 | - | 3 | 2 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65760 | - | M | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 810 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 2010-00-051-1345
What is the NIIN of the NSN 2010-00-051-1345?
The National Item Identification Number (NIIN) of the NSN 2010-00-051-1345 is 00-051-1345
When the NSN 2010-00-051-1345 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 2010-00-051-1345 contain any precious metals?
Type/content is unknown
Does the NSN 2010-00-051-1345 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products