Panel Screw Assembly
965345-32
(NSN) National Stock Number
5305-00-001-4698
Federal Supply Classification
5305 Screws
Item Name Code
33044
Schedule B Code
7318152000
Summary
3a thread class, right-hand thread direction, 0.635 inches minimum and 0.675 inches maximum fastener length, knurled no. 4 head style, 0.356 inches nominal head diameter, 0.270 inches nominal head height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 7 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33044 | A003B0 | - | 1 |
Specifications
Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Fastener Length
0.635 inches minimum and 0.675 inches maximum
Details
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.Head Style
knurled no. 4
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.Head Diameter
0.356 inches nominal
Details
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.Head Height
0.270 inches nominal
Details
A measurement from the bottom to the top of the head,in distinction from depth.Internal Drive Style
offset cruciform (torque set)
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.Material Accommodated Thickness
0.031 inches minimum and 0.062 inches maximum
Details
The thickness of the material to be accommodated.Nominal Thread Diameter
0.138 inches
Details
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Thread Quantity Per Inch
32
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Minimum Tensile Strength
140000 pounds per square inch
Details
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.Material
aluminum alloy 6061 head
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
aluminum alloy 6061 stand-off
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
iron alloy 660 fastener
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 302 spring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5732 assn std single material response fastener
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
astm a580 assn std single material response spring
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/8 fed spec single material response head
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/8 fed spec single material response stand-off
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize head
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
anodize stand-off
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate fastener
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
passivate spring
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,ty 1 cl 1 mil spec single treatment response head
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
mil-a-8625,ty 1 cl 1 mil spec single treatment response stand-off
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response fastener
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
qq-p-35 fed spec single treatment response spring
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Thread Series Designator
unc
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| DTR7500-6-A-2 | 0HDW7 | 5 | - | C | 1 | - | ZZ |
| DTR7500-6-A-2 | 17446 | 5 | - | 3 | 2 | - | ZZ |
| CS9007TS-6-1-2 | 58998 | 5 | - | 3 | 2 | - | KZ |
| FT1180-6-1-2 | 58794 | 5 | - | 3 | 2 | - | KZ |
| DTR7500-6-A-2 | 97928 | 5 | - | 5 | 9 | - | KZ |
| 965345-2 | 58194 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 05760 | - | Q | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
RAYTHEON COMPANY DBA RAYTHEON DIV RAYTHEON AIRBORNE RADARS
CAGE: 82577
EL SEGUNDO
, CA
, 90245-4501
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5305-00-001-4698
What is the NIIN of the NSN 5305-00-001-4698?
The National Item Identification Number (NIIN) of the NSN 5305-00-001-4698 is 00-001-4698
When the NSN 5305-00-001-4698 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Sep 22, 1972
Does the NSN 5305-00-001-4698 contain any precious metals?
Type/content is unknown
Does the NSN 5305-00-001-4698 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
Panel Screw Assembly
5305-00-001-4698
DTR7500-6-A-2
Panel Screw Assembly
5305-00-001-4698
DTR7500-6-A-2
Panel Screw Assembly
5305-00-001-4698
CS9007TS-6-1-2
Panel Screw Assembly
5305-00-001-4698
FT1180-6-1-2
Panel Screw Assembly
5305-00-001-4698
DTR7500-6-A-2
Panel Screw Assembly
5305-00-001-4698
965345-2