Motor-Generator
611240
(NSN) National Stock Number
6125-00-025-3946
Federal Supply Classification
6125 Rotating Electrical Converters
Item Name Code
00830
Schedule B Code
8502400000
Summary
15.437 inches overall height, 36.375 inches overall length, 12.437 inches overall width, dc input current type, continuous duty cycle, dripproof protected-15 deg enclosure feature
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
An item which is an electrical rotating machine combining both motor and generator action. It is designed for converting the electrical power characteristics such as frequency, voltage, and the like, to another form. The motor and generator(s) may be contained in the same or separate housings. It may be supported by a base, motor-generator and include accessories such as bed plate, filters, voltage regulators, and the like. For items designed to provide energy from a engine or wind power, see: generator set (as modified). Excludes: dynamotor, and items consisting of a servomotor and a tachometer generator.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00830 | A271A0 | - | 1 |
Specifications
Overall Height
15.437 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
36.375 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
12.437 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Current Type
dc input
Details
Indicates the type of current whether alternating,direct,or both.Duty Cycle
continuous
Details
The working period under which the item was designed to operate.Enclosure Feature
dripproof protected-15 deg
Details
An indication of the feature/s/ of the enclosure.Mounting Method
bed plate
Details
The means of attaching the item.Mounting Facility Type And Quantity
4 unthreaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
self-ventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Inclosure Specification
mil-std-108
Details
The government or industrial specification or standard that defines the inclosure feature.Features Provided
horizontal mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Power Rating
2.500 kilowatts input
Details
The amount of electrical energy that can be dissipated.Nominal Center To Center Distance Between Mounting Facilities Parallel To Length
21.750 inches
Details
The nominal center to center distance between the mounting facilities parallel to the length.Temp Rating
40.0 ambient deg celsius
Details
The temperature at which the item is designed to operate.Rotor Speed Rating In Rpm
1800.0 single full load
Details
The speed rating of a rotor,expressed in revolutions per minute.Nominal Center To Center Distance Between Mounting Facilities Parallel To Width
9.500 inches
Details
The nominal center to center distance between the mounting facilities parallel to the width.Connection Type And Voltage Rating In Volts
120.0 line to line single output
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Connection Type And Voltage Rating In Volts
230.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Phase
single output
Details
The number of alternating current phases.Frequency In Hertz
60.0 output
Details
The cycles per second /hertz/ of the alternating current.Test Data Document
81349-mil-m-2130a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 6125-00-025-3946
What is the NIIN of the NSN 6125-00-025-3946?
The National Item Identification Number (NIIN) of the NSN 6125-00-025-3946 is 00-025-3946
When the NSN 6125-00-025-3946 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 6125-00-025-3946 contain any precious metals?
Type/content is unknown
Does the NSN 6125-00-025-3946 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.