RJ12CY203JM
Resistor,variable,nonwire Wound,
This page provides complete and verified information for part number RJ12CY203JM, NSN 5905-01-188-4278
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
0.100 reliability failure rate level in percent, established reliability indicator, 1 section quantity, 1.340 inches maximum overall length, rectangular w/mounting holes/slots body style
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Section Quantity
- 1
- Body Style
- rectangular w/mounting holes/slots
- Reliability Indicator
- established
- Reliability Failure Rate Level In Percent
- 0.100
- Overall Length
- 1.340 inches maximum
- Terminal Length
- 0.500 inches nominal
- Overall Height
- 0.861 inches maximum
- Overall Width
- 0.200 inches maximum
- Mounting Hole Diameter
- 0.093 inches nominal
- Shaft Diameter
- 0.115 inches nominal
- Shaft Length
- 0.085 inches nominal
- Body Length
- 1.250 inches nominal
- Body Width
- 0.190 inches nominal
- Body Height
- 0.315 inches nominal
- Shaft Style
- round, slotted
- Actuator Type
- single shaft
- Effective Electrical Rotation In Deg Angular Rotation
- 6120.0 minimum and 9720.0 maximum
- Maximum Starting Torque
- 8.00 inch-ounces
- Maximum Running Torque
- 8.00 inch-ounces
- Center To Center Distance Between Terminals
- 0.700 inches nominal
- Fragility Factor
- moderately delicate
- Lateral Distance Between Mounting Hole Centers
- 1.000 inches nominal
- Mounting Facility Quantity
- 2
- Mounting Method
- terminal and unthreaded hole
- Center To Center Distance Between Terminal Rows
- 0.100 inches nominal
- Electrical Resistance Per Section
- 20.000 kilohms single section
- Rotary Actuator Travel In Angular Deg
- 6120.0 minimum and 9720.0 maximum
- Center To Center Distance Between Center Terminal And Outside Terminal
- 0.300 inches nominal
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
- 150.0 single section
- Terminal Location
- lower adjacent side two rows
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
- -250.0 to 250.0 single section
- Power Dissipation Rating Per Section In Watts
- 0.75 free air single section
- Resistance Tolerance Per Section In Percent
- -10.0 to 10.0 single section
- Actuator Travel Control Feature
- clutch
- Ambient Temp In Deg Celsius Per Section At Full Rated Power
- 85.0 single section
- Test Data Document
- "81349-mil-r-39035 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- Terminal Type And Quantity
- 3 pin
- Specification/Standard Data
- 81349-mil-r-39035/1 government specification
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Source of Supply
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- SMS - Defense logistics agency, enterprise business systems
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A002A0
- A - Item does not contain precious metal.
- 0037405
- N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- 8533400080
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- TX
- 062960
- X
- 35140
- P - 77.5
- 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
- 3 - Electrostatic sensitive device (esd)
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- reostats/parts noi
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for RJ12CY203JM
What is the FSCG of the NSN 5905-01-188-4278?
Does the NSN 5905-01-188-4278 have a Schedule B code assigned?
Does NSN 5905-01-188-4278 require demilitarization?
Does NSN 5905-01-188-4278 contain precious materials?
Does NSN 5905-01-188-4278 contain hazardous materials?
When the NSN 5905-01-188-4278 was assigned to the Federal Catalog?
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
