2ACA12013

Gasket

This page provides complete and verified information for part number 2ACA12013, NSN 5330-01-610-0920

You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5330 Packing and Gasket Materials

National Stock Number

5330-01-610-0920

Item Name Code

04522

Assigment Date

08/09/2012 (14 years ago)

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

gasket,manifold ex part name assigned by controlling agency, clyinder head assembly end item identification

Characteristics

Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.

End Item Identification: clyinder head assembly
Part Name Assigned By Controlling Agency: gasket,manifold ex

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
Automatic Data Processing Point
Demilitarization
Criticality
Federal Item Identification Guide
Precious Metals Indicator
Pseudo Item Name Code
Hazardous Material Indicator

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
National Motor Freight Classification Item Number
National Motor Freight Classification Sub-Item Number
Uniform Freight Classification Item Number
National Motor Freight Class Rating
Water Commodity
Type of Cargo
Special Hand
Air Dimension
Air Commodity
National Motor Freight Description

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 2ACA12013

What is the FSCG of the NSN 5330-01-610-0920?

The FSCG of the NSN 5330-01-610-0920 is 5330

Does NSN 5330-01-610-0920 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5330-01-610-0920 contain precious materials?

Item does not contain precious metal.

Does NSN 5330-01-610-0920 contain hazardous materials?

Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

When the NSN 5330-01-610-0920 was assigned to the Federal Catalog?

It was assigned 14 years ago, on Thu, Aug 9, 2012