Quartz Crystal Unit

MILC3098-60

(NSN) National Stock Number

5955-00-001-3328

Federal Supply Classification

5955 Oscillators and Piezoelectric Crystals

Item Name Code

00196

Schedule B Code

8541900000

Summary

0.753 inches minimum and 0.778 inches maximum overall length, 0.223 inches minimum and 0.248 inches maximum terminal length, 0.435 inches maximum overall width, 0.530 inches maximum body length, 0.402 inches maximum body width, 0.150 inches maximum body thickness

DAC	HCC	DMIL	RNCC
4	-	-	4

RNVC	SADC	MSDS	RNAAC
1	-	-	48

Identification

An item which consists of a quartz crystal resonator(s), suitably mounted in a holder, quartz crystal.

INC	FIIG	Concept	Condition
00196	A059A0	-	1

Specifications

Overall Length

0.753 inches minimum and 0.778 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Terminal Length

0.223 inches minimum and 0.248 inches maximum

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Overall Width

0.435 inches maximum

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Body Length

0.530 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

0.402 inches maximum

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Thickness

0.150 inches maximum

Details

A measurement of the smallest dimension of a body,in distinction from length or width.

Overall Thickness

0.183 inches maximum

Details

An overall measurement of the smallest dimension of an item,in distinction from length or width.

Terminal Diameter

0.038 inches minimum and 0.042 inches maximum

Details

The length of a straight line which passes through the center of a terminal,and terminates at the circumference.

Mode Of Oscillation

fifth overtone

Details

The mode of frequency at which the device is designed to operate.

Circuit Resonance

series resonance

Details

The condition existing when the frequency or vibration equals the natural frequency.

Shunt Capacitance In Picofarads

7.0 maximum

Details

The total static capacitance of the item when measured across the terminals,expressed in picofarads.

Specified Frequency

84.550 megahertz

Details

The frequency at which the item is designed to operate under specified conditions.

Center To Center Distance Between Terminals

0.184 inches minimum and 0.200 inches maximum

Details

The center to center distance between terminals.

Operating Temp Range

-40.0 to 90.0 deg celsius and -55.0 to 105.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Drive Level Rating

1.6 milliwatts minimum and 2.4 milliwatts maximum

Details

The drive level at which the item is designed to operate.

Frequency Tolerance For Operating Temp In Percent

-0.002 to 0.002 and -0.003 to 0.003

Details

The permissible frequency deviation within the operating temperature range,expressed in percent.

Equivalent Resistance Value In Ohms

50.0 nominal

Details

The equivalent (effective) resistance for which the item is rated,expressed in ohms.

Style Designator

oval body, pin terminals

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-milc3098 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
CR83U84-55000MHZ	59492	5	-	5	9	-	48
CR83484-55000MHZ	1LAX4	5	-	5	1	-	ZZ
CR83U84-55000MHZ	13571	4	-	5	9	-	48
ER83U84-55000MHZ	13571	5	-	5	9	-	48
CR83U84-55000MHZ	00136	5	-	5	1	-	48
CR83U84-55000MHZ	81349	4	-	2	2	-	48

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
-	-	-	-

RVC	WCC	TCC	SHC
-	-	-	-

Provided with every order

Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.

Counterfeit Parts Prevention
100% Product Inspections
7 Year Record Retention
On Time Delivery
HAZMAT Certified
Worldwide Shipping

Manufacturer

MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

CAGE: 81349

View Products

FAQs

Frequently asked questions for NSN 5955-00-001-3328

What is the NIIN of the NSN 5955-00-001-3328?

The National Item Identification Number (NIIN) of the NSN 5955-00-001-3328 is 00-001-3328

When the NSN 5955-00-001-3328 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Fri, Sep 22, 1972

Does the NSN 5955-00-001-3328 contain any precious metals?

Type/content is unknown

Does the NSN 5955-00-001-3328 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.