5310-01-050-6078

No Name Available

Find complete technical information, availability, and procurement data for NSN 5310-01-050-6078 All details are based on official government and industry records to support accurate and compliant procurement.

Federal Supply Group

Hardware and Abrasives

Federal Supply Classification

5310 Nuts and Washers

National Stock Number

5310-01-050-6078

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5310-01-050-6078, no name available

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Source of Supply
Demilitarization
Precious Metals Indicator
Hazardous Material Indicator

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 5310-01-050-6078

What is the FSCG of the NSN 5310-01-050-6078?

The FSCG of the NSN 5310-01-050-6078 is 5310

Does NSN 5310-01-050-6078 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 5310-01-050-6078 contain precious materials?

Precious metal content is unknown

Does NSN 5310-01-050-6078 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.