Straight Shaft
666230-270
Unthreaded cross drilled first end style, not identical end similarity, circular grooved and flatted second end style, 0.0312 inches nominal second end groove width, 0.1480 inches nominal second end groove diameter, 4.220 inches nominal overall length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22109 | A23200 | 1 | 2 |
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Details
A term used to identify the ends as identical or not identical.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.Details
None.Details
None.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of the first end,and terminates at the circumference.Details
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.Details
None.Details
A measurement between specified points of the hole at the first end,in distinction from height.Details
None.Details
A measurement of the longest dimension of the flat at the second end,in distinction from width.Details
None.Details
The length of a straight line which passes through the center of the second end,and terminates at the circumference.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 666230-270 | 12436 | A | - | 5 | 9 | - | AX |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65750 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
What is the NIIN of the NSN 3040-00-001-6518?
When the NSN 3040-00-001-6518 was assigned to the Federal Catalog?
Does the NSN 3040-00-001-6518 contain any precious metals?
Does the NSN 3040-00-001-6518 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.