Dynamic Microphone
MIL-PRF-26542/7
(NSN) National Stock Number
5965-00-011-6742
Federal Supply Classification
5965 Microphones and Speakers Handsets Headsets
Item Name Code
00362
Schedule B Code
8518903000
Summary
Mask type body style, 1.125 inches nominal width, 24.125 inches nominal length, 96906 connector manufacturer code, connector accessory components, +300.0 to 4000.0 frequency response range in hertz
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| E | - | - | 4 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | ZZ |
Identification
A microphone which depends for its operation upon the generation of an electromotive force by the motion of a moving coil within a magnetic field.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00362 | A06400 | 1 | 1 |
Specifications
Body Style
mask type
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Width
1.125 inches nominal
Details
A measurement taken at right angles to the length of an item,in distinction from thickness.Length
24.125 inches nominal
Details
A measurement of the longest dimension of any object,in distinction from width.Connector Manufacturer Code
96906
Details
The identifying numeric code of the originator that controls or manufactures the electrical connector receptacle.Accessory Components
connector
Details
The additional parts supplied with the item which may be required for application.Frequency Response Range In Hertz
+300.0 to 4000.0
Details
The minimum and maximum frequencies to which the item will respond,expressed in hertz.Impedance Selection Method
screw type lead positioning
Details
The means used to select the output impedance of the item.Impedance Rating
10.0 ohms nominal
Details
The total opposition /resistive and reactive/ to the flow of alternating current.Output Sensitivity Rating In Decibels
35.0
Details
The rating indicating the ratio of the output voltage or power to the input voltage or power at a specified reference energy level,expressed in decibels.Output Sensitivity Rating Reference
0.0002 dynes per sq centimeter
Details
The electrical output rating and sound pressure input rating which are used as a base reference for the measurement of the sensitivity of an item.Polarity Connection
not required
Details
An indication of whether or not the item requires a specific polarity for connection into the operating circuit.Sound Pickup Directional Type
bidirectional
Details
Indicates the specific type of sound pickup which determines the performance of the item.Electrical Connection Type
integral cord
Details
Indicates the type of electrical connection included on the item.Connector Identification
u173u
Details
The specification,standard,or manufacturer's number or symbol used to identify the connector.Extended Cable Length
2.0 feet nominal
Details
A measurement of the longest dimension of a cable or cord when fully extended.Cable Conductor Quantity
2
Details
The number of conductors,shielded and unshielded,which make up the cable.Cable Shielded Conductor Quantity
2
Details
The number of insulated conductors within the cable that are inclosed in an electrical shield.Test Data Document
81349-mil-m-21734 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 687-0719 | 81134 | 5 | - | 5 | 9 | - | 9Z |
| 687-3544 | 81134 | 5 | - | C | 1 | - | ZZ |
| M94 | 81134 | 3 | - | C | 1 | - | ZZ |
| M-94B/A | 81349 | E | - | 2 | 2 | - | TX |
| MIL-M-26542/7 | 81349 | E | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 87660 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 81349
FAQs
Frequently asked questions for NSN 5965-00-011-6742
What is the NIIN of the NSN 5965-00-011-6742?
The National Item Identification Number (NIIN) of the NSN 5965-00-011-6742 is 00-011-6742
When the NSN 5965-00-011-6742 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, May 24, 1972
Does the NSN 5965-00-011-6742 contain any precious metals?
Type/content is unknown
Does the NSN 5965-00-011-6742 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products