Nonmetallic Hose Assembly
(NSN) National Stock Number
4720-00-007-2230
Federal Supply Classification
4720 Hose and Flexible Tubing
Item Name Code
20311
Schedule B Code
-
Summary
Round cross-sectional shape style, right-hand 1st end thread direction, 1.000 inches nominal inside diameter, 6.000 inches minimum inside bending radius, swivel nut, gasket seal 1st end connection style, straight 1st end end connection design
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | AX |
Identification
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes:hose assembly, air duct; and hose assembly, air duct, air breathing.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 20311 | A542A0 | - | 2 |
Specifications
Cross-Sectional Shape Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.Thread Direction
right-hand 1st end
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Inside Diameter
1.000 inches nominal
Details
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.Minimum Inside Bending Radius
6.000 inches
Details
The minimum inside bending radius formed without stressing or deformation of a flexible item.Connection Style
swivel nut, gasket seal 1st end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.End Connection Design
straight 1st end
Details
The physical configuration of the outside of the end connection.End Fitting Component And Material
complete fitting steel all ends
Details
The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.Fitting Component And Surface Treatment
complete fitting zinc 1st end
Details
The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.Connection Type
threaded internal pipe 1st end
Details
Indicates the type of connection/s/.Layer Composition And Location
1st layer braided cotton cord or 1st layer braided fabric or 1st layer braided fiber and 2nd layer braided steel wire and 3rd layer braided cotton cord or 3rd layer braided fabric or 3rd layer braided fiber and outer layer molded rubber, synthetic
Details
The material and formation identifying the structural characteristic/s/ of the item and location.Nominal Thread Size
1.000 inches 1st end
Details
A designation that is used for the purpose of general identification of the thread.Hydrostatic Test Pressure
300.0 pounds per square inch
Details
A steady,uniform,internal,static pressure that the item must withstand without leakage,abnormal distortion,or damage.Outer Covering Environmental Protection
salt water resistant
Details
The type of protection provided by the outer covering.Vacuum In Torr
254.0
Details
The ultimate maximum vacuum,expressed in terms of absolute pressure,that may be produced by or applied to an item.Inside Surface Condition
smooth
Details
The condition of the item with respect to the texture of the inner surface.Measuring Method And Length
240.000 inches nominal excluding end fittings
Details
The means used and the measurement of the longest dimension of an item.Special Features
inner conveying tube material-rubber, synthetic
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Media For Which Designed
water, salt single response
Details
The type of media for which the item is designed.Thread Series Designator
npt 1st end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Specification/Standard Data
fed zz-h-561 professional/industrial association specification
Details
The document designator of the specification or standard which established the item of supply.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 52350 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 736 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
FAQs
Frequently asked questions for NSN 4720-00-007-2230
What is the NIIN of the NSN 4720-00-007-2230?
The National Item Identification Number (NIIN) of the NSN 4720-00-007-2230 is 00-007-2230
When the NSN 4720-00-007-2230 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Jul 7, 1972
Does the NSN 4720-00-007-2230 contain any precious metals?
Type/content is unknown
Does the NSN 4720-00-007-2230 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.