Band Suppression Filter

60F2

(NSN) National Stock Number

5915-00-001-8829

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00210

Schedule B Code

8527995030

Summary

2.750 inches nominal overall height, 1.625 inches nominal body length, 1.625 inches nominal body width, 2.375 inches nominal body height, 1.188 inches nominal distance between centerlines of mounting facilities parallel to body length, +10.0 to 55.0 vibration resistance range in hertz

DAC	HCC	DMIL	RNCC
5	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

An item designed to suppress frequencies within a specified range (band) and to pass frequencies outside the range (band). Excludes:a single inductance, a single capacitance, or a single resistance. See coil (as modified); capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
00210	A047B0	3	1

Specifications

Overall Height

2.750 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Body Length

1.625 inches nominal

Details

A measurement of the longest dimension of the body,in distinction from width.

Body Width

1.625 inches nominal

Details

A measurement taken at right angles to the length of the body,in distinction from thickness.

Body Height

2.375 inches nominal

Details

A measurement from the bottom to the top of the body,in distinction from depth.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.188 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the length of the item.

Vibration Resistance Range In Hertz

+10.0 to 55.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.188 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the width of the item.

Operating Temp Range

+0.0 to 85.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Average Life Rating In Hours

10000.0

Details

The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.

Reference Frequency Per Function

60.0 hertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Source Impedance Rating Per Function

1.0 kilohms blank

Details

The total opposition per function,presented by a source of energy to the input terminals of an item.

Load Impedance Per Function

3.0 kilohms blank

Details

The total opposition per function,presented by a load to the output terminals of an item.

Mounting Facility Screw Thread Series Designator

unc

Details

A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the mounting facility.

Inclosure Type

hermetically sealed

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

4 threaded stud

Details

Indicates the type and number of facilities by which the item is mounted.

Insertion Loss At Reference Frequency Per Function In Decibels

1.5 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

1 wire hook input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 wire hook output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

2 wire hook ground 3rd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Specified Frequencies Of Discrimination Per Function

30.00 hertz blank and 55.00 hertz blank and 65.00 hertz blank and 90.00 hertz blank

Details

The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.

Nominal Thread Size

0.138 inches

Details

A designation that is used for the purpose of general identification of the thread.

Body Material

metal

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Frequency Band Width Per Function

55.00 hertz blank and 65.00 hertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Discrimination At Specified Frequencies Per Function In Decibels

3.0 maximum blank and 15.0 minimum blank 1st function

Details

The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.

Style Designator

rectangular terminal/terminals on one surface

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
40926	22558	5	-	5	2	-	TX
GF82 CW1	26512	5	-	5	2	-	TX
GF825CW1	26512	1	-	5	2	-	TX
60F22	00222	5	-	5	2	-	TX
SM60F22	00222	1	-	5	9	-	TX
60F22	07650	1	-	C	1	-	ZZ
GF825CW1	98330	5	-	5	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

Provided with every order

Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.

Counterfeit Parts Prevention
100% Product Inspections
7 Year Record Retention
On Time Delivery
HAZMAT Certified
Worldwide Shipping

Manufacturer

MERIT INDUSTRIES INC

CAGE: 07650

TOLEDO , OH , 43617-1000

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-001-8829

What is the NIIN of the NSN 5915-00-001-8829?

The National Item Identification Number (NIIN) of the NSN 5915-00-001-8829 is 00-001-8829

When the NSN 5915-00-001-8829 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Wed, Sep 27, 1972

Does the NSN 5915-00-001-8829 contain any precious metals?

Does not contain precious metal

Does the NSN 5915-00-001-8829 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.