Band Pass Filter
20058
(NSN) National Stock Number
5915-00-000-0148
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary
0.650 inches nominal overall height, 2.000 inches nominal body length, 0.500 inches nominal body width, 0.400 inches maximum body height, 0.125 inches nominal unthreaded mounting hole diameter, 1.770 inches nominal distance between centerlines of mounting facilities parallel to body length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00209 | A047B0 | 3 | 1 |
Specifications
Overall Height
0.650 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Body Length
2.000 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.500 inches nominal
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.400 inches maximum
Details
A measurement from the bottom to the top of the body,in distinction from depth.Unthreaded Mounting Hole Diameter
0.125 inches nominal
Details
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
1.770 inches nominal
Details
The distance between centerlines of mounting facilities parallel to the length of the item.Vibration Resistance Range In Hertz
+14.0 to 200.0
Details
The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.Operating Temp Range
-25.0 to 167.0 deg fahrenheit
Details
The minimum and maximum limits of temperature at which the item is rated for operation.Average Life Rating In Hours
9000000.0
Details
The numeric value indicating the average life expectancy for which the item is rated,expressed in hours.Reference Frequency Per Function
20.0 megahertz blank
Details
The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.Source Impedance Rating Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a source of energy to the input terminals of an item.Load Impedance Per Function
50.0 ohms blank
Details
The total opposition per function,presented by a load to the output terminals of an item.Principal Circuitry Type Per Function
crystal blank
Details
Indicates the type of principal circuitry per function interconnected within the item to produce the desired frequency versus attenuation characteristics.Average Power Rating Per Function
0.1 watts blank
Details
The value of the average amount of electrical energy per function,which the item may pass or dissipate in continuous operation without degradation of physical or electrical characteristics.Inclosure Type
hermetically sealed
Details
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.Mounting Facility Type And Quantity
2 unthreaded hole
Details
Indicates the type and number of facilities by which the item is mounted.Features Provided
moisture resistant and mounting bracket
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Insertion Loss At Reference Frequency Per Function In Decibels
5.0 blank
Details
The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.Functional Terminal Type And Quantity
1 pin input 1st function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 pin ground 3rd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Functional Terminal Type And Quantity
1 pin output 2nd function
Details
Indicates the functional type and number of terminals providing electrical connection to the item.Specified Frequencies Of Discrimination Per Function
15.00 megahertz blank and 19.99 megahertz blank and 20.00 megahertz blank and 25.00 megahertz blank
Details
The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.Body Material
metal
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Frequency Band Width Per Function
19.997 megahertz blank and 20.003 megahertz blank
Details
The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.Discrimination At Specified Frequencies Per Function In Decibels
3.0 minimum blank and 50.0 maximum blank
Details
The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.Voltage Standing Wave Ratio Frequency Limits Per Function
19.997 megahertz blank and 20.003 megahertz blank
Details
The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.Body Surface Treatment
tin
Details
The metallic,nonmetallic,and/or chemical properties with which the body is plated,dipped and/or coated. the treatment is designed to protect the body surface/s/ and cannot be wiped off.Special Features
unpackaged unit weight: oz0.125
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Style Designator
rectangular terminal/terminals on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 8556927 | 49671 | 5 | - | 5 | 9 | - | CL |
| SM-A-775630 | 80063 | A | - | 3 | 2 | - | TX |
| 20Q58 | 00136 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58500 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA MICROSEMI CORP - HIGH PERFORMANCE TIMING
CAGE: 00136
MOUNT HOLLY SPRINGS
, PA
, 17065-1821
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-000-0148
What is the NIIN of the NSN 5915-00-000-0148?
The National Item Identification Number (NIIN) of the NSN 5915-00-000-0148 is 00-000-0148
When the NSN 5915-00-000-0148 was assigned to the Federal Catalog?
It was assigned 46 years ago, on Fri, Apr 28, 1978
Does the NSN 5915-00-000-0148 contain any precious metals?
Does not contain precious metal
Does the NSN 5915-00-000-0148 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products