Alternating Current Motor
TJ-1506
(NSN) National Stock Number
6105-00-003-6141
Federal Supply Classification
6105 Electrical Motors
Item Name Code
00530
Schedule B Code
-
Summary
3.250 inches overall height, 4.000 inches overall length, 3.250 inches overall width, 0.5000 inches nominal single end thread length, 0.250 inches minimum and 0.312 inches maximum single end shaft diameter, 0.2500 inches nominal single end flatted portion length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | CX |
Identification
A motor which is designed for operation from an alternating current source. See also motor, control.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00530 | A271A0 | 1 | 1 |
Specifications
Overall Height
3.250 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
4.000 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
3.250 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Thread Length
0.5000 inches nominal single end
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Shaft Diameter
0.250 inches minimum and 0.312 inches maximum single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Flatted Portion Length
0.2500 inches nominal single end
Details
None.Flat Depth
0.0625 inches nominal single end
Details
None.Shaft Rotation Direction
clockwise single end
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Duty Cycle
continuous
Details
The working period under which the item was designed to operate.Enclosure Feature
open protected
Details
An indication of the feature/s/ of the enclosure.Winding Type
induction-shaded pole
Details
Indicates the specific arrangement in which wire is wound on a form or is formed by winding.Mounting Method
face
Details
The means of attaching the item.Mounting Facility Type And Quantity
2 threaded stud
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
fan cooled
Details
The means of cooling used to maintain the required operating temperature of the item.Flat Center To Shaft End Distance
0.2500 inches nominal single end
Details
None.Current Rating Method
load
Details
The means by which the current is rated.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Shaft End Style
external threaded and flat grooved single end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft end.Features Provided
thermal protective device and horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Nominal Thread Size
0.250 inches single end
Details
A designation that is used for the purpose of general identification of the thread.Length Of Shaft From Housing
1.000 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Mounting Facility Circle Diameter
3.250 inches
Details
The length of a straight line which passes through the center of a mounting facility circle,and terminates at the circumference.Rotor Speed Rating In Rpm
1550.0 single full load
Details
The speed rating of a rotor,expressed in revolutions per minute.Current Rating In Amps
0.370 single input
Details
The amount of current for which an item is rated,expressed in amperes.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Phase
single input
Details
The number of alternating current phases.Special Features
style a6 has additional flat groove at 180 deg,same dim.
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Frequency In Hertz
50.0 or 60.0 input
Details
The cycles per second /hertz/ of the alternating current.Thread Series Designator
unc single end
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Terminal Type And Quantity
2 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
JET SPRAY CORP JET SPRAY CUSTOMER SERVICES DIV
CAGE: 15498
NORWOOD
, MA
, 02062-3951
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 6105-00-003-6141
What is the NIIN of the NSN 6105-00-003-6141?
The National Item Identification Number (NIIN) of the NSN 6105-00-003-6141 is 00-003-6141
When the NSN 6105-00-003-6141 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, May 19, 1972
Does the NSN 6105-00-003-6141 contain any precious metals?
Type/content is unknown
Does the NSN 6105-00-003-6141 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.