Control Motor
5760-3000
(NSN) National Stock Number
6105-00-001-6460
Federal Supply Classification
6105 Electrical Motors
Item Name Code
19258
Schedule B Code
8412809000
Summary
2.250 inches overall height, 3.500 inches overall length, 2.250 inches overall width, 0.2495 inches nominal single end shaft diameter, 0.6250 inches nominal single end flatted portion length, ac input current type
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | CX |
Identification
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19258 | A271A0 | 1 | 1 |
Specifications
Overall Height
2.250 inches
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Length
3.500 inches
Details
A measurement of the longest dimension of an item,in distinction from width.Overall Width
2.250 inches
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Shaft Diameter
0.2495 inches nominal single end
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Flatted Portion Length
0.6250 inches nominal single end
Details
None.Current Type
ac input
Details
Indicates the type of current whether alternating,direct,or both.Flat Depth
0.0100 inches nominal single end
Details
None.Enclosure Feature
totally inclosed
Details
An indication of the feature/s/ of the enclosure.Mounting Method
pad
Details
The means of attaching the item.Mounting Facility Type And Quantity
4 threaded stud
Details
Indicates the type and number of facilities by which the item is mounted.Cooling Method
nonventilated
Details
The means of cooling used to maintain the required operating temperature of the item.Control Field Impedance Rating In Ohms
39.5
Details
The impedance rating of the control field,expressed in ohms.Control Field Winding Type
single winding
Details
Indicates the type of winding(s) of the control field.Torque Rating And Type
55.0 inch-ounces stalled
Details
Indicates the torque rating,and its type.Inclosure Specification
commercial
Details
The government or industrial specification or standard that defines the inclosure feature.Control Field Voltage Type And Rating In Volts
22.0 ac
Details
Indicates the type of control field voltage and its rating,expressed in volts.Features Provided
electric noise suppressor and horizontal mounting position and vertical mounting position
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Length Of Shaft From Housing
0.750 inches single end
Details
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.Rotor Speed Rating In Rpm
110.0 single no load
Details
The speed rating of a rotor,expressed in revolutions per minute.Nominal Center To Center Distance Between Mounting Facilities Parallel To Width
1.906 inches
Details
The nominal center to center distance between the mounting facilities parallel to the width.Nominal Center To Center Distance Between Mounting Facilities Parallel To Height
1.906 inches
Details
The nominal center to center distance between the mounting facilities parallel to the height.Connection Type And Voltage Rating In Volts
115.0 line to neutral single input
Details
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.Shaft End Characteristic
a5 single style single end
Details
An indication of the characteristic(s) of the shaft end.Phase
two input
Details
The number of alternating current phases.Frequency In Hertz
60.0 input
Details
The cycles per second /hertz/ of the alternating current.Terminal Type And Quantity
4 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5760-3000 | 24655 | 1 | - | 5 | 9 | - | CX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 6105-00-001-6460
What is the NIIN of the NSN 6105-00-001-6460?
The National Item Identification Number (NIIN) of the NSN 6105-00-001-6460 is 00-001-6460
When the NSN 6105-00-001-6460 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Sep 24, 1972
Does the NSN 6105-00-001-6460 contain any precious metals?
Does not contain precious metal
Does the NSN 6105-00-001-6460 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products