Rod End Clevis
(NSN) National Stock Number
5340-00-059-8203
Federal Supply Classification
5340 Commercial Hardware
Item Name Code
03796
Schedule B Code
-
Summary
3b rod connection thread class, right-hand rod connection thread direction, 1.030 inches minimum rod connection and 1.060 inches maximum rod connection thread length, 0.190 inches minimum and 0.191 inches maximum hole diameter, 0.375 inches nominal end radius, 0.750 inches nominal overall diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also yoke, universal joint and connector, rod end. For items specifically designed for aviation, see clevis, rod end, aviation.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 03796 | A264A0 | - | 2 |
Specifications
Thread Class
3b rod connection
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Thread Direction
right-hand rod connection
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
1.030 inches minimum rod connection and 1.060 inches maximum rod connection
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Hole Diameter
0.190 inches minimum and 0.191 inches maximum
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.End Radius
0.375 inches nominal
Details
A measurement of a straight line extending from the center of a circle to the end.Overall Diameter
0.750 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Fork Span Width
0.270 inches nominal
Details
The distance laterally from tip to tip of the fork.Distance From Pivot Pinhole Center To Rod Connection End
1.850 inches nominal
Details
None.Fork Arm Thickness
0.115 inches nominal
Details
None.Fork Depth
0.975 inches nominal
Details
The measurement between specified points of the fork,in distinction from height.Nominal Thread Size
0.500 inches rod connection
Details
A designation that is used for the purpose of general identification of the thread.Material
aluminum alloy 7075 overall
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-225/9,t651 fed spec single material response overall
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize overall
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
cva9-4,ltv aeronautics corp,vought aeronautics div mfr ref single treatment response overall
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
clevis
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Thread Series Designator
unf rod connection
Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 49240 | - | U | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 713 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
FAQs
Frequently asked questions for NSN 5340-00-059-8203
What is the NIIN of the NSN 5340-00-059-8203?
The National Item Identification Number (NIIN) of the NSN 5340-00-059-8203 is 00-059-8203
When the NSN 5340-00-059-8203 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Tue, Jun 13, 1967
Does the NSN 5340-00-059-8203 contain any precious metals?
Type/content is unknown
Does the NSN 5340-00-059-8203 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.