225-S
Spring Tension Clip
This page provides complete and verified information for part number 225-S, NSN 5340-01-059-3561
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.
0.500 inches nominal width, 0.188 inches nominal hole diameter, 0.030 inches nominal material thickness, 1.000 inches nominal overall height, 1.312 inches nominal length
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Hole Diameter
- 0.188 inches nominal
- Width
- 0.500 inches nominal
- Overall Height
- 1.000 inches nominal
- Material Thickness
- 0.030 inches nominal
- Length
- 1.312 inches nominal
- Loop/Holding Dimension
- 0.375 inches nominal
- Material
- steel overall
- Surface Treatment
- cadmium overall
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 4 - Partial descriptive item identification (type 1 concept)
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A03100
- A - Item does not contain precious metal.
- 0020815
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 7326908630
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Less than Car Load Rating
- Rail Variation
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- SE
- 094230
- X
- 49780
- U - 50.0
- Q - 70.0
- 1
- 713 - Metal hardware
- Z - No special type of cargo code applicable
- Z - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- BZ -
- clips spring assembly i/s
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 225-S
What is the FSCG of the NSN 5340-01-059-3561?
Does the NSN 5340-01-059-3561 have a Schedule B code assigned?
Does NSN 5340-01-059-3561 require demilitarization?
Does NSN 5340-01-059-3561 contain precious materials?
Does NSN 5340-01-059-3561 contain hazardous materials?
When the NSN 5340-01-059-3561 was assigned to the Federal Catalog?
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
