5925-01-040-6141

Characteristics

Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.

Body Style

multipole-single actuator type

Bushing Length

0.332 inches minimum and 0.380 inches maximum

Body Length

1.937 inches maximum

Body Width

1.562 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.906 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.594 inches minimum and 0.656 inches maximum

Fragility Factor

moderately rugged

Mounting Surface To Terminal End Distance

1.828 inches maximum

Pole Quantity

3

Mounting Facility Type And Quantity

1 threaded bushing w/panel seal and 2 threaded hole

Storage Type

general purpose warehouse

Special Handling Feature

magnetic

Thread Quantity Per Inch

32

Maximum Continuous Load Current Rating Per Pole

20.0 amperes ac and 20.0 amperes dc all locations

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac and 50.0 dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

300.0 ac and 500.0 dc all locations

Circuit Protection Type

overcurrent all locations

Trip Release Method

magnetic all locations

Trip Release Characteristic

time delay all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Reset Method

manual

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Actuator Function

trip-reset

Actuator Position Designation

at pole two

Internal Trip Release Configuration

series trip all locations

Nominal Thread Size

0.375 inches and 0.188 inches

Trip Delay Time In Seconds Per Rated Continuous Current

0.500 minimum at 200 pct and 9.000 maximum at 200 pct all locations

Inclosure Protection Type For Which Designed

hermetically sealed and moisture resistant and shockproof and vibrationproof

Unpackaged Unit Weight

5.400 ounces nominal

Frequency In Hertz

400.0 all locations

Precious Material And Location

contact surfaces silver

Precious Material

silver

Test Data Document

"81349-mil-c-39019 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Series Designator

unef and unc

Terminal Type And Quantity

6 wire hook

Specification/Standard Data

81349-mil-c-39019/5 government specification

Replaces National Stock Numbers

Below is a list of NSNs that have been officially replaced by the NSN 5925-01-040-6141

Related Parts & Specifications

This NSN includes a range of related parts designed for specific operational needs. Review each item below to find in-depth specifications, functional details, and guidance for correct application and replacement.

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification

4 - Partial descriptive item identification (type 1 concept)

Demilitarization

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Criticality

X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Federal Item Identification Guide

A030A0

Precious Metals Indicator

S - Item contains silver.

Pseudo Item Name Code

0000136

Hazardous Material Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Schedule B Code

8536200040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity

TX

National Motor Freight Classification Item Number

063160

National Motor Freight Classification Sub-Item Number

Z

Uniform Freight Classification Item Number

35205

National Motor Freight Class Rating

W - Rating variable

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

Type of Cargo

Z - No special type of cargo code applicable

Special Hand

9 - Other or no special handling required (sh)

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Air Commodity

HZ -

National Motor Freight Description

switch boxes/elec enclosures

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 5925-01-040-6141

Recommended for You

Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.

6130-01-605-0602

5306-00-843-9964

6110-01-560-3616

5945-00-997-9335

2915-01-181-3979

Popular Parts

Browse our top-performing parts, selected based on customer demand and procurement frequency. All listings include up-to-date specs, availability, and condition: