Mica Dielectric Fixed Capacitor
CMR05C050D0DM
(NSN) National Stock Number
5910-00-001-3025
Federal Supply Classification
5910 Capacitors
Item Name Code
00005
Schedule B Code
8532290020
Summary
W/o mtg facilities terminal(s) on one surface body style, not established reliability indicator, 1.000 inches minimum terminal length, 0.425 inches nominal body length, 0.360 inches maximum body width, 0.130 inches nominal body height
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 2 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 00005 | A010B0 | 1 | 1 |
Specifications
Body Style
w/o mtg facilities terminal(s) on one surface
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Reliability Indicator
not established
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Terminal Length
1.000 inches minimum
Details
A measurement of the longest dimension of a terminal,in distinction from width.Body Length
0.425 inches nominal
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.360 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.130 inches nominal
Details
A measurement from the bottom to the top of the body,in distinction from depth.Center To Center Distance Between Terminals Parallel To Length
0.194 inches minimum and 0.256 inches maximum
Details
The center to center distance between terminals parallel to the length of the item.Terminal Diameter
0.025 inches nominal
Details
The length of a straight line which passes through the center of a terminal,and terminates at the circumference.Schematic Diagram Designator
no common or grounded electrode(s)
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Insulation Resistance At Maximum Operating Temp
10000.0 megohms
Details
Direct current resistance between two conductors that are separated by an insulating material,measured at the maximum operating temperature of the item.Capacitance Value Per Section
5.000 picofarads single section
Details
The relative level of the quantity of electric charge at a given potential which the capacitor is capable of receiving and storing per section.Nonderated Operating Temp
-55.0 deg celsius minimum and 125.0 deg celsius maximum
Details
The temperature/s/ at which an item can function without voltage derating.Nonderated Continuous Voltage Rating And Type Per Section
500.0 dc single section
Details
The highest value and type of potential that may be continuously applied to the item per section at the highest operating temperature permissible without voltage derating.Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius
-200.0 to 200.0 single section
Details
The minimum and maximum values of the permissible change in capacitance per section caused by a change in temperature,expressed in parts per million per degree celsius.Tolerance Range Per Section
-0.50 to 0.50 picofarads single section
Details
The limits of permissible deviation per section of a measured value from a specified value.Case Material
plastic
Details
The chemical compound or mechanical mixture properties of which the case is fabricated. please use mrc matt with isac table 0326 in place of this canceled mrc.Insulation Resistance At Reference Temp
100000.0 megohms
Details
Direct current resistance between two conductors that are separated by an insulating material,measured at reference temperature.Dissipation Factor At Reference Temp In Percent
0.0015
Details
The ratio of resistance to capacitive reactance measured at reference temperature.Terminal Surface Treatment
solder
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated. the treatment is designed to protect the terminal surface(s) and cannot be wiped off.Test Data Document
81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Terminal Type And Quantity
2 uninsulated wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Specification/Standard Data
81349-mil-c-39001/5 government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 4112310-40 | 05869 | 6 | - | 5 | 2 | - | 9Z |
| CMR05C050J0DM | 81349 | 3 | - | 5 | 9 | - | TX |
| MIL-C-39001/5 | 81349 | 3 | - | 4 | 1 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34450 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 81349
FAQs
Frequently asked questions for NSN 5910-00-001-3025
What is the NIIN of the NSN 5910-00-001-3025?
The National Item Identification Number (NIIN) of the NSN 5910-00-001-3025 is 00-001-3025
When the NSN 5910-00-001-3025 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Sep 24, 1972
Does the NSN 5910-00-001-3025 contain any precious metals?
Type/content is unknown
Does the NSN 5910-00-001-3025 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products