TAP685M035G
Electrolytic Fixed Capacitor
This page provides complete and verified information for part number TAP685M035G, NSN 5910-01-115-7708
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
Federal Supply Group
Electrical and Electronic Equipment Components
Federal Supply Classification
5910 Capacitors
National Stock Number
5910-01-115-7708
Item Name Code
00008
Assigment Date
07/13/1981 (45 years ago)
w/o mtg facilities, terminal(s) on one end body style, not established reliability indicator, 0.260 inches nominal body diameter, 0.450 inches nominal body length, 0.630 inches nominal terminal length
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Body Style
- w/o mtg facilities, terminal(s) on one end
- Reliability Indicator
- not established
- Terminal Length
- 0.630 inches nominal
- Body Diameter
- 0.260 inches nominal
- Body Length
- 0.450 inches nominal
- Center To Center Distance Between Terminals Parallel To Diameter
- 0.125 inches nominal
- Terminal Diameter
- 0.020 inches nominal
- Schematic Diagram Designator
- no common or grounded electrode(s)
- Anode Type
- solid
- Electrical Polarization
- polarized
- Capacitance Value Per Section
- 6.800 microfarads single section
- Nonderated Operating Temp
- -55.0 celsius minimum and 85.0 celsius maximum
- Dc Leakage At Maximum Operating Temp
- 30.0 microamperes
- Nonderated Continuous Voltage Rating And Type Per Section
- 35.0 dc single section
- Tolerance Range Per Section
- -20.00 to 20.00 percent single section
- Capacitive Electrode Material
- tantalum
- Dissipation Factor At Reference Temp In Percent
- 6.0000
- Dc Leakage At Reference Temp
- 3.000 microamperes
- Terminal Surface Treatment
- solder
- Material
- plastic case
- Terminal Type And Quantity
- 2 uninsulated wire lead
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A010B0
- A - Item does not contain precious metal.
- 0000008
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8532290040
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- TX
- 061400
- X
- 34450
- P - 77.5
- 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- condensers/parts noi/capacitors
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for TAP685M035G
What is the FSCG of the NSN 5910-01-115-7708?
The FSCG of the NSN 5910-01-115-7708 is 5910
Does the NSN 5910-01-115-7708 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
Does NSN 5910-01-115-7708 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-01-115-7708 contain precious materials?
Item does not contain precious metal.
Does NSN 5910-01-115-7708 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-01-115-7708 was assigned to the Federal Catalog?
It was assigned 45 years ago, on Mon, Jul 13, 1981
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
FREE
