B32541-1MF100V
Capacitor,fixed,metallized,paper
This page provides complete and verified information for part number B32541-1MF100V, NSN 5910-01-059-8353
You’ll find detailed technical specifications, product attributes, condition classification, and real-time stock availability. All data is based on official records and meets industry standards for defense, aerospace, and industrial sourcing. Whether you’re performing a parts audit, validating compliance, or preparing a purchase order, this part listing supports accurate and efficient procurement.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
0.220 inches nominal terminal length, w/o mtg facilities terminal(s) on one surface body style, 0.302 inches nominal body width, not established reliability indicator, 0.396 inches nominal body length
Characteristics
Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.
- Body Style
- w/o mtg facilities terminal(s) on one surface
- Reliability Indicator
- not established
- Terminal Length
- 0.220 inches nominal
- Body Length
- 0.396 inches nominal
- Body Width
- 0.302 inches nominal
- Body Height
- 0.280 inches nominal
- Center To Center Distance Between Terminals Parallel To Length
- 0.371 inches nominal
- Terminal Diameter
- 0.023 inches nominal
- Schematic Diagram Designator
- no common or grounded electrode(s)
- Capacitance Value Per Section
- 1.000 microfarads single section
- Nonderated Operating Temp
- -40.0 celsius minimum and 100.0 celsius maximum
- Nonderated Continuous Voltage Rating And Type Per Section
- 100.0 dc single section
- Tolerance Range Per Section
- -5.00 to 5.00 percent single section
- Insulation Resistance At Reference Temp
- 10000.0 megohms
- Dissipation Factor At Reference Temp In Percent
- 10.000
- Terminal Surface Treatment
- solder
- Dielectric Material
- plastic polycarbonate
- Material
- plastic case
- Terminal Type And Quantity
- 2 uninsulated wire lead
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Source of Supply
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- S9E - Defense supply center columbus, columbus, oh 43218
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A010B0
- A - Item does not contain precious metal.
- 0031959
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- 8532290040
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- DX
- 061400
- X
- 34450
- P - 77.5
- 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- condensers/parts noi/capacitors
FAQs
Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for B32541-1MF100V
What is the FSCG of the NSN 5910-01-059-8353?
Does the NSN 5910-01-059-8353 have a Schedule B code assigned?
Does NSN 5910-01-059-8353 require demilitarization?
Does NSN 5910-01-059-8353 contain precious materials?
Does NSN 5910-01-059-8353 contain hazardous materials?
When the NSN 5910-01-059-8353 was assigned to the Federal Catalog?
Need Consumables?
Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.
Recommended for You
Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.
Price & Availability
Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:
