1. Home /
  2. Catalog /
  3. Capacitors /
  4. 5910-01-059-2509

5910-01-059-2509

Ceramic Dielectr Fixed Capacitor

Find complete technical information, availability, and procurement data for NSN 5910-01-059-2509 All details are based on official government and industry records to support accurate and compliant procurement.

5910-01-059-2509
Federal Supply Group
Electrical and Electronic Equipment Components
Federal Supply Classification
5910 Capacitors
National Stock Number
5910-01-059-2509
Item Name Code
00007
Assigment Date
04/09/1978 (48 years ago)

0.0100 reliability failure rate level in percent, w/o mtg facilities terminal(s) on one surface body style, established reliability indicator, 0.190 inches nominal body length, 1.250 inches minimum terminal length

Characteristics

Below are the official specifications and performance details for this part, including technical data, material composition, and compliance information.

Body Style
w/o mtg facilities terminal(s) on one surface
Reliability Indicator
established
Reliability Failure Rate Level In Percent
0.0100
Terminal Length
1.250 inches minimum
Body Length
0.190 inches nominal
Body Width
0.190 inches nominal
Body Height
0.090 inches nominal
Center To Center Distance Between Terminals Parallel To Length
0.200 inches nominal
Terminal Diameter
0.020 inches minimum and 0.027 inches maximum
Schematic Diagram Designator
no common or grounded electrode(s)
Insulation Resistance At Maximum Operating Temp
10000.0 megohms
Capacitance Value Per Section
330.000 picofarads single section
Nonderated Operating Temp
-55.0 celsius minimum and 125.0 celsius maximum
Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius
0.0 single section
Nonderated Continuous Voltage Rating And Type Per Section
200.0 dc single section
Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius
-30.0 to 30.0 single section
Tolerance Range Per Section
-1.00 to 1.00 percent single section
Insulation Resistance At Reference Temp
100000.0 megohms
Dissipation Factor At Reference Temp In Percent
0.1500
Terminal Surface Treatment
solder
Material
plastic case
Test Data Document
"81349-mil-c-20 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Terminal Type And Quantity
2 uninsulated wire lead
Specification/Standard Data
81349-mil-c-20/35 government specification

Related Parts & Specifications

This NSN includes a range of related parts designed for specific operational needs. Review each item below to find in-depth specifications, functional details, and guidance for correct application and replacement.

Part Number Name
CCR05CG331FM Ceramic Dielectr Fixed Capacitor
CCR05CG331FP Ceramic Dielectr Fixed Capacitor
CCR05CG331FR Ceramic Dielectr Fixed Capacitor

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Automatic Data Processing Point
0 - Represents items with no adp components
Source of Supply
S9E - Defense supply center columbus, columbus, oh 43218
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A010B0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0000007
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8532290040

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061400
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34450
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
condensers/parts noi/capacitors

FAQs

Get insights on installation procedures, operating conditions, care instructions, industry regulations, and common issues. FAQs below provide key information for 5910-01-059-2509

What is the FSCG of the NSN 5910-01-059-2509?
The FSCG of the NSN 5910-01-059-2509 is 5910
Does the NSN 5910-01-059-2509 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
Does NSN 5910-01-059-2509 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5910-01-059-2509 contain precious materials?
Item does not contain precious metal.
Does NSN 5910-01-059-2509 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5910-01-059-2509 was assigned to the Federal Catalog?
It was assigned 48 years ago, on Sun, Apr 9, 1978

Need Consumables?

Running low on essential supplies? Explore our extensive catalog of high-quality consumables designed to keep your operations on track.

Electrical Wires

Recommended for You

Discover a selection of other high-demand NSN components from our catalog. These featured parts are frequently sourced by procurement teams across defense, aerospace, and industrial sectors.

Price & Availability

Fill out the form to get accurate pricing, lead time, and stock details from our NSN specialists:

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

Popular Parts

Browse our top-performing parts, selected based on customer demand and procurement frequency. All listings include up-to-date specs, availability, and condition:

105843R92
2530-00-845-1602
Master Cy Brake Booster Assembly
105844
5310-00-103-0660
Recessed Washer
105844-033
5940-00-518-8432
Lug Terminal
105844-1
3130-01-150-7772
Ball Bearing Unit
10584456
3040-01-714-6880
Shouldered Shaft
105845
4320-01-632-7686
Wearing Ring
105845-1
5365-01-145-0671
Spacer
105845-2
5365-01-145-0670
Spacer
105846-1
1680-01-196-9896
Actuator Cover
1058460
3040-01-492-2258
Hub Clamp
105847
5985-00-757-3038
Waveguide Support
105847-1
5340-01-334-5829
Mounting Bracket
1058470
5340-01-492-0973
Mounting Plate
105848-1
1680-01-334-5800
Block End Assembly
1058481
6625-01-571-6047
Multimeter