Hydraulic Brak Cylinder Assembly
6U6013-1
(NSN) National Stock Number
1630-00-088-3507
Federal Supply Classification
1630 Aircraft Wheel and Brake Systems
Item Name Code
11007
Schedule B Code
8803200060
Summary
Pin mounting provision, 2.240 inches nominal overall height, 1.350 inches nominal overall width, direct actuation method, 20.0 seat angle in deg, 0.500 inches nominal first end external thread length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
A device consisting of a reservoir and/or cylinder, hydraulic brake, master with other components necessary to displace fluid from a central source for actuating the slave or wheel cylinders of a hydraulic brake system.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 11007 | A34200 | - | 2 |
Specifications
Mounting Provision
pin
Details
The provision/s/ for mounting the item. please use mrc bhms in place of this discontinued mrc.Overall Height
2.240 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
1.350 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Actuation Method
direct
Details
The means by which the item is actuated.Seat Angle In Deg
20.0
Details
The angle of the end surface upon which the mated surface seats,expressed in degrees.First End External Thread Length
0.500 inches nominal
Details
None.Compressed Length
9.760 inches nominal
Details
A measurement of the smallest length to which the item may be compressed,in distinction from width.Extended Length
11.260 inches nominal
Details
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.Reservoir Type
remote
Details
Indicates the type of reservoir provided.Straight Bore Inside Diameter
1.043 inches nominal
Details
None.First Piston Rod End Style
external threaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.First Piston Rod End Thread Series Designator
unf
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the first piston rod end.First Piston Rod End Thread Diameter
0.250 inches nominal
Details
The length of a straight line which passes through the center of the first piston rod end which would bound the crest of an external thread or the root of an internal thread.First Piston Rod End Thread Quantity Per Inch
28
Details
The number of screw threads on the first piston rod end per linear inch measured on a line parallel to the thread axis.First Piston Rod End Thread Class
3a
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread of the first piston rod end.First Piston Rod End Thread Direction
right-hand
Details
The direction of the first piston rod end thread when viewed axially. a right-hand thread winds in clockwise direction while a left-hand thread winds in a counterclockwise direction.Mounting Type And Location
trunnion cylinder head end
Details
Indicates the type of mounting and the location on the item.Mounting Facility Diameter
0.250 inches nominal
Details
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.Port Location And Quantity
3 center section
Details
Indicates the location and number of ports on the item.Port Style
gasket seal
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.Port Thread Series Designator
unf
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.Port Thread Diameter
0.562 inches nominal
Details
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.Port Thread Quantity Per Inch
18
Details
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.Port Thread Class
2b
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.Material
aluminum alloy body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Fsc Application Data
brake system,aircraft
Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 04780 | - | J | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 671 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 1630-00-088-3507
What is the NIIN of the NSN 1630-00-088-3507?
The National Item Identification Number (NIIN) of the NSN 1630-00-088-3507 is 00-088-3507
When the NSN 1630-00-088-3507 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 1630-00-088-3507 contain any precious metals?
Type/content is unknown
Does the NSN 1630-00-088-3507 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.