Hydraulic Brak Cylinder Assembly
18050-10
(NSN) National Stock Number
1630-00-056-2329
Federal Supply Classification
1630 Aircraft Wheel and Brake Systems
Item Name Code
11007
Schedule B Code
8807200060
Summary
0.770 inches minimum and 0.830 inches maximum all working ends first end outside diameter, pin mounting provision, -65.0 deg fahrenheit and 275.0 deg fahrenheit temp rating, 1.440 inches nominal mounting facility length, 1.840 inches maximum body outside diameter, 1.940 inches nominal overall diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 3 | - | - | CT |
Identification
A device consisting of a reservoir and/or cylinder, hydraulic brake, master with other components necessary to displace fluid from a central source for actuating the slave or wheel cylinders of a hydraulic brake system.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 11007 | A34200 | - | 2 |
Specifications
First End Outside Diameter
0.770 inches minimum and 0.830 inches maximum all working ends
Details
None.Mounting Provision
pin
Details
The provision/s/ for mounting the item. please use mrc bhms in place of this discontinued mrc.Temp Rating
-65.0 deg fahrenheit and 275.0 deg fahrenheit
Details
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.Mounting Facility Length
1.440 inches nominal
Details
A measurement of the longest dimension of a mounting facility,in distinction from width.Body Outside Diameter
1.840 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Overall Diameter
1.940 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Actuation Method
direct
Details
The means by which the item is actuated.Seat Angle In Deg
45.0 single port
Details
The angle of the end surface upon which the mated surface seats,expressed in degrees.First End Hole Diameter
0.2495 inches minimum and 0.2500 inches maximum all working ends
Details
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.First End Thickness At Mounting Holes
0.432 inches minimum and 0.437 inches maximum all working ends
Details
None.Compressed Length
11.500 inches nominal
Details
A measurement of the smallest length to which the item may be compressed,in distinction from width.Extended Length
13.000 inches nominal
Details
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.Reservoir Type
remote
Details
Indicates the type of reservoir provided.Straight Bore Inside Diameter
1.188 inches minimum and 1.520 inches maximum
Details
None.First Piston Rod End Style
bearing type all working ends
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.Mounting Type And Location
tongue cylinder head end
Details
Indicates the type of mounting and the location on the item.Mounting Facility Diameter
0.2495 inches minimum and 0.2500 inches maximum
Details
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.Port Location And Quantity
1 piston rod end and 2 center section
Details
Indicates the location and number of ports on the item.Port Style
gasket seal single port
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.Port Thread Series Designator
unf single port
Details
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.Port Thread Diameter
0.438 inches nominal single port
Details
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.Port Thread Quantity Per Inch
20 single port
Details
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.Port Thread Class
3b single port
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.Bleeding Feature Quantity
1
Details
The number of bleeding features included.Material
aluminum alloy 356.0 body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Test Data Document
77272-114hs105 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Reference Number Differentiating Characteristics
as differentiated by source control dwg no. 114hs105 fscm 77272
Details
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 114HS105-6 | 77272 | 1 | - | 1 | 3 | - | CT |
| 114HS105-6 | 81205 | X | - | 5 | 3 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | A | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 04960 | - | M | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 671 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
Manufacturer
FAQs
Frequently asked questions for NSN 1630-00-056-2329
What is the NIIN of the NSN 1630-00-056-2329?
The National Item Identification Number (NIIN) of the NSN 1630-00-056-2329 is 00-056-2329
When the NSN 1630-00-056-2329 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 1630-00-056-2329 contain any precious metals?
Does not contain precious metal
Does the NSN 1630-00-056-2329 contain any hazardous material?
No information in HMIRS
What is the ESD classification of NSN 1630-00-056-2329?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products