ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Flat Washer NSN 5310-00-167-0837

Item Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.

NSN 5310-00-167-0837 NSN: 5310-00-167-0837
NSN Flat Washer NSN 5310-00-167-0837 image

  Provided with every order

  •   Counterfeit Parts Prevention
  •   100% Product Inspections
  •   7 Year Record Retention
  •   On Time Delivery
  •   HAZMAT Certified
  •   Worldwide Shipping

Get a Quote

Get an up to date price on nsn 5310001670837
Quantity
Email quote to
Phone Number
Company
Your Name
Privacy    Terms

Major End Items End items to which 5310-00-167-0837 is a component of

  • A1N Close In Weapon System (ciws-phalanx)
  • A6N Chilled Water A/c Systems
  • ABF B-52 Aircraft Support Equipment
  • ACF B-1 Aircraft Support Equipment
  • AHN Fire Pumps
  • AMN 02n2 Systems
  • APN Ffg-7 Sas (starting Air Sys)
  • ATF Hc-130) Ec-130e Mc-130h Sof ( Ac-130h Aircraft
  • AWN Mk 26 (gmls) Guided Missile Launching System
  • N/A Ambulance Truck
  • N/A Aircraft Submerged Pump
  • N/A C Gear Box Assembly
  • N/A Alternating Current Generator
  • N/A Seat Head Support
  • N/A Indicator Assembly
  • N/A Utility Truck
  • N/A Aircraft Engine Build-up Parts Kit
  • N/A Aircraft Environmental Control Valve Assembly
  • N/A Linear Electro-mechanical Actuator
  • N/A Power Supply
  • N/A Aircraft Mechanical Actuator
  • N/A Aircraft Tip
  • N/A Retractable Landing Gear
  • N/A Landing Gear Torque Collar
  • N/A Aircraft Structural Component Support
  • N/A Metering And Distributing Fuel Pump
  • N/A Aircraft Seat
  • N/A Aircraft Gearbox Assembly
  • N/A Steerin Damper Assy
  • N/A Dual Disk Brake
  • N/A Guided Missile Maintenance Fixture
  • N/A Speed Decreaser Gear Assembly
  • N/A Test Adapter Kit
  • N/A Linear Actuating Cylinder Assembly
  • N/A Gyro Instrument Testing Tilting Table
  • N/A Electromechanical Actuator Testing Machine
  • N/A Electronic Systems Test Set
  • N/A Aircraft Bomb Ejector Rack
  • N/A Gas Turbine Engine Power Unit
  • N/A Multiplexer
  • N/A Aircraft Door Uplock Assembly
  • N/A Alternating Current Motor
  • N/A Aircraft Fuel Tank
  • N/A Air Press Regulator
  • N/A Aircraft Fairing
  • N/A Mechanical An Brake
  • N/A Aircraft Door
  • N/A Cable Quadrant
  • N/A Aircraft Heater
  • N/A Direct Current Generator
  • N/A Aircraft Strut
  • N/A Centrifugal Pump Unit
  • N/A Computer Test Set
  • N/A Refrigeration Compressor
  • N/A Cowling
  • N/A Attack Helicopter
  • N/A Tank Truck
  • N/A Horizontal Stabilizer
  • N/A Aircraft Cable Tension Regulator
  • N/A Bearing Re Tool Kit
  • N/A Cargo-transport Helicopter
  • N/A Aerial Stores Lift Truck
  • N/A Fairing Assy
  • N/A Flight Refueling Probe Receptacle Assembly
  • N/A Aircraft Cabin Air Pressure Regulator
  • N/A Breech Assembly
  • N/A Aircraft Maintenance Kit
  • N/A Conveyor Latch Assy
  • N/A Aircraft Ejection Seat
  • N/A Movable Canopy
  • N/A Engine Air Inlet
  • N/A Fluid Pressure Dampener
  • N/A Aircraft Bomb Rack
  • N/A Rocket Motor
  • N/A Guided Missile Guidance And Control Section
  • N/A Power Supply Test Set
  • N/A Turbine Engine Accessory Drive Gearbox
  • N/A Aircraft Pylon
  • N/A Main Rotor Blade
  • N/A Laser Illuminated Target Detector
  • N/A Fuselage Section
  • N/A Conso Carriage Assy
  • N/A Distribution Box
  • N/A Full Tracked Recovery Vehicle
  • N/A Aircraft Access Door
  • N/A Nonaircraft Gas Turbine Engine
  • N/A Test Adapter
  • N/A Ste Gearbox Housing
  • N/A Aircraft Mounted Winch
  • N/A Diesel Engine Generator Set
  • N/A Throttle Valve
  • N/A Air Pressure Relief Valve
  • N/A Gas Turbine Engine
  • N/A Mounting Bracket
  • N/A Electrical Distributing System
  • N/A Venti Door Assembly
  • N/A Hydraulic Drive Unit
  • N/A Photometric System-system Components Test Station
  • N/A Windshield Wiper Arm
  • N/A Observation Helicopter
  • N/A Butterfly Valve
  • N/A Aircraft Guided Missile Launcher
  • N/A Hose Reel Assembly
  • N/A Gas T Generator Set
  • N/A Single Disk Brake
  • N/A Countermeasures Set
  • N/A Air Conditioner
  • N/A Regulator Assy
  • N/A Radio Test Set
  • N/A Voltage Regulator
  • N/A Signal Generator
  • N/A Aircraft Accelerometer Tester
  • N/A Compressor
  • N/A Rotary Wing Head Spindle
  • N/A Door Lock Assembly
  • N/A Gas Turbine Engine Generator Set
  • N/A Reciprocating Compressor Unit
  • N/A Landing Gear Cylinder And Piston Assembly
  • N/A Air Refue Boom Assy
  • N/A Motor-generator
  • N/A Pitot And Static Systems Tester
  • N/A Ground Handling Equipment Adapter
  • N/A Pyl Piston Assembly
  • N/A Aircraft Wing Spoiler
  • N/A Fire Control System Test Set
  • N/A Aircraft Air Inlet Spike
  • N/A Air-antitank Defense Missile System Carrier
  • N/A Splitter Assembly
  • N/A Tank Type Water Distributor
  • N/A Antenna Case
  • N/A Wing Landing Flap
  • N/A Aircraft Aft Ramp Assembly
  • N/A Temperature Tester
  • N/A Aircraft Engine Test Stand
  • N/A Shimmy Damper
  • N/A Doo Handle Assembly
  • N/A Aircraft Air Temperature Electrical/electronic Control Box
  • N/A Directional Control Linear Valve
  • N/A Telephone Set
  • N/A Voice Terminal
  • N/A Refrigeration Compressor Unit
  • N/A Aircraft Maintenance Fixture
  • N/A Ammunition Maintenance Fixture
  • N/A Outer Wing Section
  • N/A Reaction Cylinder Assembly
  • N/A Fire Direction Cent
  • N/A Relief Valve Assy
  • N/A Wheel Bracket Assy
  • N/A Electrical Equipment Cabinet
  • N/A Radar Signal Simulator
  • N/A Photographic Film Plotting Table
  • N/A Transmission Assemb
  • N/A Digital Topographic Support System
  • N/A Sleeve Bearing
  • N/A Supportxassy Strut
  • N/A Rotary Wing Head
  • N/A Subassembly Ladder
  • N/A Hydrauli Mast Group
  • N/A Ge Installation Kit
  • N/A Aircraft Oxygen Concentrator
  • N/A Dome Light
  • N/A Vertical Stabilizer
  • N/A Rotary Compressor
  • N/A Radar Data Processor
  • N/A Electronic Test Digital Data Analyzer
  • N/A Aircraft Cargo Tie Down
  • N/A Antenna Coupler
  • N/A Ground Handling Trailer
  • N/A Rotary Wing Stabilizer
  • N/A Former Assy
  • N/A Environmental Contr
  • N/A Aircraft Cargo Rail Assembly
  • N/A Handl Tray Assembly
  • N/A H Transmission Assy
  • N/A Electronic Components Assembly
  • N/A Rotary Pump
  • N/A Aircraft Hydraulic Valve Assembly

Features and Characteristics

Cross Sectional Shape
Rectangular
Hole Diameter
Between 0.380 inches and 0.400 inches
Edge Shape
Round
Center Hole Shape
Round
Thickness
Between 0.022 inches and 0.042 inches
Overall Diameter
Between 0.620 inches and 0.645 inches
Material
Steel
Material Specification
Mil-s-7952 military specification single material response or qq-s-698 federal specification single material response
Surface Treatment
Cadmium
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response
FSC
5310 Nuts And Washers
NIIN
001670837
NSN
5310001670837

Manufacturer Part Numbers

Part numbers registered to this national stock number.
Part Number
Cage
Status
MSDS
Part Number:
5544165-6
Cage Code:
D9182
Status:
A
MSDS:
Part Number:
HFLW037EG
Cage Code:
96195
Status:
A
MSDS:
Part Number:
AN960-616L
Cage Code:
88044
Status:
A
MSDS:
Part Number:
800034
Cage Code:
19203
Status:
A
MSDS:
Part Number:
21100100-000
Cage Code:
29641
Status:
A
MSDS:
Part Number:
90790-37
Cage Code:
59875
Status:
A
MSDS:
Part Number:
810J61-1FN55
Cage Code:
81996
Status:
A
MSDS:
Part Number:
3188544PC9
Cage Code:
59364
Status:
A
MSDS:
Part Number:
3188547PC5
Cage Code:
59364
Status:
A
MSDS:
Part Number:
3188554PC18
Cage Code:
59364
Status:
A
MSDS:
Part Number:
3189442PC39
Cage Code:
59364
Status:
A
MSDS:
Part Number:
791-540-90335
Cage Code:
99193
Status:
A
MSDS:
Part Number:
938.77.11.118
Cage Code:
S4080
Status:
A
MSDS:
Part Number:
12M2547-7
Cage Code:
81755
Status:
A
MSDS:
Part Number:
800034-00
Cage Code:
32345
Status:
A
MSDS:
Part Number:
2410164
Cage Code:
001JK
Status:
A
MSDS:
Part Number:
840300
Cage Code:
09786
Status:
A
MSDS:
Part Number:
10082409
Cage Code:
A486G
Status:
A
MSDS:
Part Number:
25929
Cage Code:
99167
Status:
A
MSDS:
Part Number:
5310001670837
Cage Code:
SCY13
Status:
A
MSDS:
Part Number:
ASNA2397-616L
Cage Code:
F6198
Status:
A
MSDS:

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318220000
  • NAICS: 332722
  • SITC: 69422
  • Description: Washers other than lock washers, iron or steel
  • End Use (Code 12300):
    Finished metal shapes

Q & A

Frequently asked questions for NSN 5310-00-167-0837
What are the manufacturers of nsn 5310001670837?
Does this nsn 5310001670837 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5310001670837
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Does nsn 5310001670837 contain any precious metals?
No precious metal content.
Does nsn 5310001670837 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5310001670837?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
13393
FIIG:
A022B0
App. Key:
B
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo