ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Shear Bolt NSN 5306-01-225-5756

Item Description

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

NSN 5306-01-225-5756 NSN: 5306-01-225-5756

Features and Characteristics

Thread Class
3a
Thread Direction
Right-hand
Thread Length
0.454 inches
Fastener Length
Between 3.971 inches and 4.001 inches
Head Style
Dished hexagon
Head Height
Between 0.188 inches and 0.203 inches
Width Between Flats
Between 0.553 inches and 0.564 inches
Grip Diameter
Between 0.3738 inches and 0.3745 inches
Shank Unthreaded Hole Diameter
0.106 inches and 0.116 inches first hole
Thread Diameter
0.375 inches
Grip Length
Between 3.115 inches and 3.135 inches
Thready Qty Per Inch (tpi)
24
Min. Tensile Strength (psi)
160000 pounds per square inch
Hardness Rating
36.0 rockwell c and 40.0 rockwell c fastener
Distance From Head Largest Bearing Surface To Shank Hole Center
3.429 inches and 3.489 inches first hole
Surface Finish
63.0 microinches bearing surface of head
Special Features
Assembly area, extended at threaded end, 0.402 min. And 0.412 max. Length 0.317 min. And 0.320 max. Diameter; assembly contains retainer pawl, material cres per ams 5643, rockwell hardness 35.0 min. And 39.0 max., finish blast per bac 5951, passivate per qq-p-35, dry film lube per mil-l-8937; spring, material cres per ams 5673, rockwell hardness 48.0 min. Finish passivate per qq-p-35; pin and plugs, material 303 cres per astm a 582, finish passivate per qq-p-35
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 fastener
Surface Treatment
Cadmium and chromate fastener
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response fastener
Thread Series Designator
Unjf
FSC
5306 Bolts
NIIN
012255756
NSN
5306012255756

Manufacturer Part Numbers

Part numbers registered to this national stock number.
Part Number
Cage
Status
MSDS
Part Number:
BACB30ST6-50
Cage Code:
56878
Status:
A
MSDS:

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318152000
  • NAICS: 332722
  • SITC: 69421
  • Description: Bolts and bolts and their nuts or washers exported in the same shipment
  • End Use (Code 12110):
    Iron and steel products, other

Q & A

Frequently asked questions for NSN 5306-01-225-5756
What are the manufacturers of nsn 5306012255756?
Does this nsn 5306012255756 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5306012255756
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.
Does nsn 5306012255756 contain any precious metals?
No precious metal content.
Does nsn 5306012255756 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5306012255756?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
15903
FIIG:
A003B0
App. Key:
BX
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo