ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Close Tolerance Bolt NSN 5306-01-165-2454

Item Description

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

NSN 5306-01-165-2454 NSN: 5306-01-165-2454

Features and Characteristics

Thread Class
3a
Thread Direction
Right-hand
Thread Length
Between 0.371 inches and 0.411 inches
Fastener Length
Between 1.381 inches and 1.401 inches
Head Style
Spline drive shear head
Head Height
0.210 inches
Grip Diameter
Between 0.3740 inches and 0.3745 inches
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole
Head Minor Diameter
Between 0.578 inches and 0.585 inches
Thread Diameter
0.375 inches
Grip Length
Between 0.990 inches and 1.010 inches
Thready Qty Per Inch (tpi)
24
Distance From Head Largest Bearing Surface To Shank Hole Center
1.263 inches first hole and 1.293 inches first hole
Material
Steel comp xm-13
Material Specification
Ams5629 assn standard single material response
Surface Treatment
Passivate
Surface Treatment Specification
Qq-p-35 federal specification single treatment response
Thread Series Designator
Unjf
FSC
5306 Bolts
NIIN
011652454
NSN
5306011652454

Manufacturer Part Numbers

Part numbers registered to this national stock number.
Part Number
Cage
Status
MSDS
Part Number:
VS3174-6D16
Cage Code:
06950
Status:
A
MSDS:
Part Number:
ST3M744-6D16
Cage Code:
92215
Status:
A
MSDS:
Part Number:
SLB748-6D16
Cage Code:
16258
Status:
A
MSDS:
Part Number:
GS1015-6D16
Cage Code:
1EM77
Status:
A
MSDS:
Part Number:
122895-6D16
Cage Code:
56878
Status:
A
MSDS:
Part Number:
11823-6D16
Cage Code:
59563
Status:
A
MSDS:
Part Number:
WC744-6D16
Cage Code:
60516
Status:
A
MSDS:
Part Number:
VCG0001-6D16
Cage Code:
06710
Status:
A
MSDS:
Part Number:
AIC687-6D16
Cage Code:
06725
Status:
A
MSDS:
Part Number:
PBF1265-6D16
Cage Code:
27624
Status:
A
MSDS:
Part Number:
S406-6D16
Cage Code:
97928
Status:
A
MSDS:
Part Number:
10116048
Cage Code:
A486G
Status:
A
MSDS:
Part Number:
MB154-6D16
Cage Code:
83197
Status:
A
MSDS:

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318152000
  • NAICS: 332722
  • SITC: 69421
  • Description: Bolts and bolts and their nuts or washers exported in the same shipment
  • End Use (Code 12110):
    Iron and steel products, other

Q & A

Frequently asked questions for NSN 5306-01-165-2454
What are the manufacturers of nsn 5306011652454?
Does this nsn 5306011652454 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5306011652454
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Does nsn 5306011652454 contain any precious metals?
No precious metal content.
Does nsn 5306011652454 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5306011652454?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
27851
FIIG:
A003B0
App. Key:
BC
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo