ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Close Tolerance Bolt NSN 5306-01-077-0171

Item Description

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

NSN 5306-01-077-0171 NSN: 5306-01-077-0171

Features and Characteristics

Thread Class
3a
Thread Direction
Right-hand
Thread Length
Between 0.282 inches and 0.333 inches
Fastener Length
Between 6.918 inches and 6.938 inches
Head Style
Dished hexagon
Head Height
Between 0.126 inches and 0.141 inches
Width Between Flats
Between 0.430 inches and 0.439 inches
Grip Diameter
Between 0.2483 inches and 0.2492 inches
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole
Thread Diameter
0.250 inches
Grip Length
Between 6.500 inches and 6.516 inches
Thready Qty Per Inch (tpi)
28
Hardness Rating
36.0 rockwell c and 41.0 rockwell c
Distance From Head Largest Bearing Surface To Shank Hole Center
6.818 inches first hole and 6.848 inches first hole
Surface Finish
63.0 microinches grip
Special Features
Detent ring in shank
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150
Surface Treatment
Cadmium and chromate
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response
Thread Series Designator
Unjf
Specification Data
76301-st3-735 manufacturers standard
FSC
5306 Bolts
NIIN
010770171
NSN
5306010770171

Manufacturer Part Numbers

Part numbers registered to this national stock number.
Part Number
Cage
Status
MSDS
Part Number:
ST3M735-4-104
Cage Code:
76301
Status:
A
MSDS:
Part Number:
121673-4-104
Cage Code:
80539
Status:
A
MSDS:

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318152000
  • NAICS: 332722
  • SITC: 69421
  • Description: Bolts and bolts and their nuts or washers exported in the same shipment
  • End Use (Code 12110):
    Iron and steel products, other

Q & A

Frequently asked questions for NSN 5306-01-077-0171
What are the manufacturers of nsn 5306010770171?
Does this nsn 5306010770171 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5306010770171
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Does nsn 5306010770171 contain any precious metals?
Precious metal content is unknown.
Does nsn 5306010770171 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5306010770171?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
27851
FIIG:
A003B0
App. Key:
BC
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo