ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Close Tolerance Bolt NSN 5306-00-292-6145

Item Description

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

NSN 5306-00-292-6145 NSN: 5306-00-292-6145

Features and Characteristics

Thread Class
3a
Thread Direction
Right-hand
Thread Length
0.953 inches
Fastener Length
2.141 inches
Head Style
Hexagon
Head Height
Between 0.328 inches and 0.360 inches
Width Between Flats
Between 0.928 inches and 0.940 inches
Grip Diameter
Between 0.6234 inches and 0.6240 inches
Shank Unthreaded Hole Diameter
0.141 inches first hole
Thread Diameter
0.625 inches
Grip Length
1.188 inches
Thready Qty Per Inch (tpi)
18
Min. Tensile Strength (psi)
125000 pounds per square inch
Hardness Rating
26.0 rockwell c and 32.0 rockwell c
Distance From Head Largest Bearing Surface To Shank Hole Center
1.922 inches first hole
Surface Finish
63.0 microinches grip
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4140 or steel comp 4130
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or ams6300 assn standard 4th material response or mi military specification 5th material response
Surface Treatment
Cadmium and chromate
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response
Thread Series Designator
Unf
FSC
5306 Bolts
NIIN
002926145
NSN
5306002926145

Manufacturer Part Numbers

Part numbers registered to this national stock number.

No part numbers found for this NSN.

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318152000
  • NAICS: 332722
  • SITC: 69421
  • Description: Bolts and bolts and their nuts or washers exported in the same shipment
  • End Use (Code 12110):
    Iron and steel products, other

Q & A

Frequently asked questions for NSN 5306-00-292-6145
What are the manufacturers of nsn 5306002926145?
Does this nsn 5306002926145 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5306002926145
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Does nsn 5306002926145 contain any precious metals?
Precious metal content is unknown.
Does nsn 5306002926145 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5306002926145?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
27851
FIIG:
A003B0
App. Key:
BC
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo