ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Close Tolerance Bolt NSN 5306-00-151-3705

Item Description

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

NSN 5306-00-151-3705 NSN: 5306-00-151-3705

Features and Characteristics

Thread Class
3a
Thread Direction
Right-hand
Thread Length
Between 0.609 inches and 0.688 inches
Fastener Length
Between 1.687 inches and 1.734 inches
Head Style
Hexagon
Head Height
Between 0.203 inches and 0.235 inches
Width Between Flats
Between 0.553 inches and 0.565 inches
Hole Diameter
0.070 inches
Grip Diameter
Between 0.3737 inches and 0.3742 inches
Shank Unthreaded Hole Diameter
0.106 inches first hole
Thread Diameter
0.375 inches
Grip Length
Between 1.046 inches and 1.078 inches
Hole Quantity
1
Hole Type
Drilled
Thready Qty Per Inch (tpi)
24
Min. Tensile Strength (psi)
125000 pounds per square inch
Hardness Rating
26.0 rockwell c and 32.0 rockwell c
Hole Configuration Style
Hexagon flats
Distance From Head Largest Bearing Surface To Shank Hole Center
1.484 inches first hole and 1.516 inches first hole
Surface Finish
63.0 microinches grip
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4130 or steel comp 4140
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or ams 6300 assn standard 4th material response or mil-s-6758 military specification 5th material response or mil-s-5626 military specification 6th material response
Surface Treatment
Cadmium and chromate
Surface Treatment Specification
Qq-p-416 ty2 cl3 federal specification single treatment response
Thread Series Designator
Unf
FSC
5306 Bolts
NIIN
001513705
NSN
5306001513705

Manufacturer Part Numbers

Part numbers registered to this national stock number.
Part Number
Cage
Status
MSDS
Part Number:
AN176H15
Cage Code:
88044
Status:
A
MSDS:
Part Number:
86T15
Cage Code:
80049
Status:
A
MSDS:

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318152000
  • NAICS: 332722
  • SITC: 69421
  • Description: Bolts and bolts and their nuts or washers exported in the same shipment
  • End Use (Code 12110):
    Iron and steel products, other

Q & A

Frequently asked questions for NSN 5306-00-151-3705
What are the manufacturers of nsn 5306001513705?
Does this nsn 5306001513705 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5306001513705
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. for items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. for items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Does nsn 5306001513705 contain any precious metals?
Precious metal content is unknown.
Does nsn 5306001513705 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5306001513705?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
27851
FIIG:
A003B0
App. Key:
BC
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo