ORDER BY PHONE (619) 331-9599      Contact Us      Request Quote
facebook
NationalStockNumber.org

Close Tolerance Screw NSN 5305-01-164-9729

Item Description

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

NSN 5305-01-164-9729 NSN: 5305-01-164-9729

Features and Characteristics

Thread Class
3a
Thread Direction
Right-hand
Thread Length
Between 0.639 inches and 0.706 inches
Fastener Length
Between 2.461 inches and 2.508 inches
Head Style
Flat countersunk
Head Diameter
Between 0.826 inches and 0.888 inches
Grip Diameter
Between 0.7782 inches and 0.7784 inches
Shank Unthreaded Hole Diameter
0.096 inches first hole and 0.116 inches first hole
Internal Drive Style
Offset cruciform (torque set)
Thread Diameter
0.438 inches
Grip Length
Between 1.802 inches and 1.822 inches
Thready Qty Per Inch (tpi)
20
Min. Tensile Strength (psi)
220000 pounds per square inch
Hardness Rating
46.0 rockwell c and 50.0 rockwell c
Countersink Angle
Between 99.0 degrees and 101.0 degrees
Distance From Head Largest Bearing Surface To Shank Hole Center
2.153 inches first hole
Surface Finish
32.0 microinches threads
Material
Steel comp h11
Material Specification
Ams6487 assn standard single material response
Surface Treatment
Cadmium or cadmium and chromate
Surface Treatment Specification
Nas672 assn standard 1st treatment response or mil-c-8837, type 2, cl 3 military specification 2nd treatment response
Thread Series Designator
Unjf
FSC
5305 Screws
NIIN
011649729
NSN
5305011649729

Manufacturer Part Numbers

Part numbers registered to this national stock number.
Part Number
Cage
Status
MSDS
Part Number:
SC1779-7-29D
Cage Code:
06950
Status:
A
MSDS:
Part Number:
PBF1202-7-29D
Cage Code:
27624
Status:
A
MSDS:
Part Number:
HR204-7-29D
Cage Code:
73197
Status:
A
MSDS:
Part Number:
106706T-7-29D
Cage Code:
80539
Status:
A
MSDS:
Part Number:
GB510CE7-29D
Cage Code:
26512
Status:
A
MSDS:
Part Number:
GB510FD7-29D
Cage Code:
26512
Status:
A
MSDS:

Foreign Trade & Schedule B

What is a Schedule B number? Find more information at help.cbp.gov
  • Schedule B Number: 7318152000
  • NAICS: 332722
  • SITC: 69421
  • Description: Bolts and bolts and their nuts or washers exported in the same shipment
  • End Use (Code 12110):
    Iron and steel products, other

Q & A

Frequently asked questions for NSN 5305-01-164-9729
What are the manufacturers of nsn 5305011649729?
Does this nsn 5305011649729 have a shelf life?
No. This NSN does not have an applicable shelf life.
What is the formal definition of nsn 5305011649729
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.
Does nsn 5305011649729 contain any precious metals?
No precious metal content.
Does nsn 5305011649729 contain any hazardous materials?
No MSDS. No hazardous material.
What is the ESD classification of nsn 5305011649729?
No known electrostatic discharge.

Identification Group

Item Identification Guide (IIG) and Item Name Code (INC)
INC
FIIG
App. Key
Cond. Code
Status
INC:
29294
FIIG:
A003B0
App. Key:
SS
Cond. Code:
1
Status:
A

What do you get when you order from nationalstocknumber.org?

  •   On Time Delivery
  •   Certificate of Conformance
  •   Quality Inspected Parts
  •   Quality Fast Service
ASA Aviation Suppliers Association Member Logo
NQA AS 9120 Suppliers Logo
ITAR Registered International Traffic in Arms Regulations Logo