Features and Characteristics
Cross Sectional Shape
Round
Thread Direction
Right-hand 1st end
Inside Diameter
Between 0.173 inches and 0.203 inches
Tempurature Rating
-65.0 degrees fahrenheit single response and 500.0 degrees fahrenheit single response
Flange Thickness
0.035 inches 1st end and 0.047 inches 1st end
Outside Diameter
Between 0.304 inches and 0.343 inches
Minimum Inside Bending Radius
2.000 inches
Connection Style
Swivel nut, flareless 2nd end
End Connection Design
Straight 1st end
Connection Type
Threaded internal tube 1st end
Thready Qty Per Inch (tpi)
20 2nd end
Burst Test Pressure
12000.0 pounds per square inch
Layer Composition And Location
Outer layer braided corrosion resistant steel wire
Maximum Operating Pressure
1500.0 pounds per square inch
Thread Size
0.4375 inches 2nd end
Seat Angle
12.0 degrees 2nd end
Hydrostatic Test Pressure
3000.0 pounds per square inch
Flow Angle
90.0 degrees 2nd end
Inside Surface Condition
Smooth
Measuring Method And Length
11.000 inches working
Inside Diameter Hose Accommodated
0.188 inches 2nd end
Outside Diameter Tube Accommodated
0.250 inches 2nd end
Part Name Assigned By Controlling Agency
Hose assembly, permanently attached fittings, tetrafluoroethylene, hightemperature, medium pressure, flareless to flareless
Special Features
Burst pressure high temp 7, 000 psi min; the cut ends of the fire protection sleeve, code a, shall be coated with rtv silicone rubber, prior to installation to prevent wickingof fluids; after installation, cracks or voids in the fire protection sleeve, which expose the asbestos/fiberglass, shall be coated with rtv rubber
Media For Which Designed
Hydraulic fluid single response
Test Data Document
96906-ms33514rrja81349-mil-s-8879 standard (includes industry or association standards, individual manufactureer standards, etc.). And 81349-mil-h-27267 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Thread Series Designator
Unjf 1st end
Specification Data
96906-ms8006 government standard
FSC
4720 Hose And Flexible Tubing
NSN: 4720-01-507-5361
