Features and Characteristics
Center To Center Distance
25.600 inches
Performance Type
Light duty
Purpose For Which Designed
Toolroom
Accessory Components And Quantity
1 vee-bed; 1 headstock; 1 tailstock; 1 quick change gear box; 1 longitudinal cross and top slides; 1 single toolpost; 1 leadscrew; 1 feed shaft; 1 mt5 center; 1 mt2 center; 1 lathe dog; 1 dog pin; 1 set of wrenches; 1 grease gun; 1 instruction book and service parts list
Electric Motor Horsepower Rating
1.300
Electric Motor Quantity
1
Spindle Speed Range In Rpm
+55.0/+2200.0
Rated Swing
11.000 inches
Actual Swing Over Bed
11.000 inches
Swing Over Cross Slide
6.700 inches
Thread Change Quantity
15
Headstock Drive Type
Direct pulley, back geared or geared head
Headstock Center Taper Size Designator
5 morse
Hollow Spindle Hole Size
1.400 inches
Carriage Longitudinal Feed Operation Method
Hand and power
Carriage Cross Feed Operation Method
Hand and power
Carriage Feed Change Quantity
15
Thread Quantity Range
+9.0/+64.0 per inch
Special Features
The following items are available when specified; machine lamp, p/n 533100; 3 jaw self-centering chuck, p/n v3v746; vertical milling and drilling attachment, p/n 524.1rb for inch type, p/n 524.1ra for metric type; 4 jaw self-centering chuck, p/n v3v748; 3 jaw drill chuck, p/n 250000; drill chuck arbor mt2, p/n 251000; revolving center mt2, p/n 732000; quick-change toolpost, p/n 583180a; toolholder, p/n 583182a; longitudinal stop, p/n 584030; boring bar holder, p/n 583183a; cutoff toolholder, p/n 583184a; cutoff blade, p/n 583600a; knurling toolholder, p/n 583185a; lateral stop, p/n 548000; thread dial indicator, p/n 584310; collet holder, p/n 584041a; collet set, p/n 586200a; leveling pad set, p/n 585110; camlock chuck adaptor d1-4, p/n 584010; milling table, p/n 565350; machine vise, p/n 761310; swivel base, p/n 761320; stepped clamping shoe, p/n 465100
Reference Number Differentiating Characteristics
Differentiated by feat requirements
NSN: 3416-01-385-3998
