Features and Characteristics
Center To Center Distance
33.750 inches
Performance Type
Standard duty
Purpose For Which Designed
General
Accessory Components And Quantity
2 belt, flat, v-dr.; 1 bench-lathe; 1bit, lathe tool holder, high speed steel, boring, 3/16by3/16in.Turning 1/4by1/4in.; 2 blade lathe tool holder, cut off, high speed steel, 3/32by5/8 in.; 2 ctr., lathe, pipe, 1/2by 3 in.; 2 ctr., lathe, 60 deg.No.2 morse taper; 2 chuck, drill, 3 jaw, 0 to 1/2 in.; 2 chuck, lathe, fitted, ind., 4 jaw, rev., 8 in., univ., 3 jaw, w/2 sets jaws, 1 set internal, 1 set ext., 6 in.; 2 collet, split, f/round work, 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 1 in.; 2 collet attachment, h/wheel type, 1/16 to 1 in.; 2 cutting attachment, milling and keyway; 2 lathe, bent tail, single screw, single, 3/8, 3/4, 1-1/4, 1-1/2, 2-1/2 in.; 2 face plate, 5-5/8, 8-3/8 in.; 2 set gears, metric transposing, eng.Grad.; 2 holder, lathe tool, turning, straight, 3/8 by 7/8 in.Shank for 1/4 by 1/4 in.Bit, boring, 3/8 by 7/8 in.Shank, comp.W/9/16 in.Bar and 30, 45, 90 deg.End caps for 3/16 in.Bits, cutting off, rh, 3/8 by 7/8 in.Shank, f/3/32 by 5/8 in.Blade
Electric Motor Horsepower Rating
0.75
Electric Motor Quantity
1
Spindle Speed Quantity
12
Spindle Speed Range In Rpm
+55.0 to 1400.0
Rated Swing
10.000 inches
Actual Swing Over Bed
10.125 inches
Swing Over Cross Slide
5.750 inches
Thread Change Quantity
48
Headstock Drive Type
Step cone pulley, back geared
Headstock Center Taper Size Designator
2 asa standard
Hole Diameter Through Spindle
1.375 inches
Carriage Longitudinal Feed Operation Method
Hand and power
Carriage Cross Feed Operation Method
Hand and power
Thread Quantity Range
+4.0 to 80.0 per inch
Voltage In Volts
220.0 and 440.0
Special Features
2 holder, lathe tool, cutting off, straight 3/8 by 7/8 in.Shank, f/3/32 by 5/8 in.Blade, turning, offset, lh, 3/8 by 7/8 in.Shank, f/1/4 by 1/4 in.Bit; 2 indic., thread dial; 2 knurling tool, revolving head, 3/8 by 7/8 by 5-1/2 in.Shank, w/3 pr knurls diamond shape, fine, med., coarse 2 post, tool, to accommodate 3/8 by 7/8 in.Shank; 2 rest, cpd.Grad., follower, steady; 2 sleeve, lathe, h/stock spindle; 2 stop, carriage, micrometer, thread cutting, adjustable; 2 switch, 208v, 3 pos.Start, stop, rev.; 2 taper attachment, telescopic, lathe
NSN: 3416-00-174-9171
