Features and Characteristics
Fungus Resistant Treatment
Not included
Accessory Components And Quantity
Raising mechanism for head or table 1, self-locking depth stop 1, depth gage 1, belt guard 1, belt and motor pulley (specify bore) 1, safety collar for head 1, motor 1, controls 1
Radio Interference Shielding
Not provided
Rotation Reversibility Feature
Not included
Main Drive Type
Electric motor
Spindle Socket Taper Size
3 morse
Spindle Travel Distance
6.000 inches
Base Working Surface Length
16.250 inches
Base Working Surface Width
13.500 inches
Drilling Capability
1 in. Drilling capacity in mild steel
Distance From Spindle Center To Column
11.875 inches
Base Working Surface Type
Tee slotted
Base Working Surface Shape
Rectangular
Base Working Surface Area
219.000 square inches
Base Working Surface Mounting Location
Column
Maximum Distance From Chuck/spindle Nose To Base Working Surface
44.500 inches
Upper Working Surface Type
Slotted w/center hole
Upper Working Surface Shape
Rectangular
Upper Working Surface Area
288.000 square inches
Upper Working Surface Length
18.000 inches
Upper Working Surface Width
16.000 inches
Upper Working Surface Adjustment Feature
Included
Upper Working Surface Vertical Adjustment
34.250 inches
Tilt Adjustment Direction And Angle In Deg
90.0 left
Spindle Type
Tapered socket
Spindle Speed Range In Rpm
+125.0/+1400.0
Upper Working Surface Mounting Location
Column
Maximum Distance From Chuck/spindle Nose To Upper Working Surface
34.250 inches
Voltage In Volts
230.0 or 460.0
Special Features
24 volt push button station, magnetic starter, transformer and 3-leg overload protection (lvc), meight ball bearings regidly support spindle on speed reduction models. Ten-spline spindle is 3/4 in. In diameter for greater torque transmission. Large 2 3/8 in. Diameter quill is supported by three precision bored lands in head, providing extra smooth travel. Long columns provide extra big capacity for large work.
FSC
3413 Drilling And Tapping Machines
NSN: 3413-01-369-3043
