An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
NSN: 3120-00-426-0442
No part numbers found for this NSN.
|
What are the manufacturers of nsn 3120004260442? |
|
Does this nsn 3120004260442 have a shelf life? No. This NSN does not have an applicable shelf life. |
|
What is the formal definition of nsn 3120004260442 An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve. |
|
Does nsn 3120004260442 contain any precious metals? Precious metal content is unknown. |
|
Does nsn 3120004260442 contain any hazardous materials? No MSDS. No hazardous material. |
|
What is the ESD classification of nsn 3120004260442? No known electrostatic discharge. |
What do you get when you order from nationalstocknumber.org?
