Straight Shaft
Splined (involute) first end style, identical end similarity, 2.045 inches minimum and 2.055 inches maximum overall length, 0.5500 inches minimum and 0.5600 inches maximum first end diameter, 0.5500 inches minimum and 0.5800 inches maximum first end spline length, 0.5700 inches nominal first end spline minor diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22109 | A23200 | 1 | 2 |
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.Details
A term used to identify the ends as identical or not identical.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of the first end,and terminates at the circumference.Details
A measurement of the longest dimension of the first end spline,in distinction from width.Details
The length of a straight line which passes through the center of the smallest circular cross section of the first end spline,and terminates at the circumference.Details
The length of a straight line which passes through the center of the largest circular cross section of the first end spline,and terminates at the circumference.Details
None.Details
A measurement indicating the diameter-pitch per measurement scale of the first end.Details
None.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Details
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 10106912 | A486G | 9 | - | 6 | 9 | - | WF |
| 2040781-1 | 70210 | 1 | - | 5 | 9 | - | KE |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 65750 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Provided with every order
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- Counterfeit Parts Prevention
- 100% Product Inspections
- 7 Year Record Retention
- On Time Delivery
- HAZMAT Certified
- Worldwide Shipping
What is the NIIN of the NSN 3040-01-140-3194?
When the NSN 3040-01-140-3194 was assigned to the Federal Catalog?
Does the NSN 3040-01-140-3194 contain any precious metals?
Does the NSN 3040-01-140-3194 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.