67607DH2C

Rotary Switch

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. 67607DH2C, NSN 5930-00-713-8433

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

67607DH2C
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5930 스위치
국가 재고 번호
5930-00-713-8433
품목 이름 코드
02134
배정 날짜
01/01/1963 (63년 전)

0.375 inches nominal single mounting facility thread length, 1.625 inches maximum overall width, 2.188 inches nominal overall height, 2a single mounting facility thread class, 2.750 inches nominal overall length

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

스레드 클래스
2a single mounting facility
나사산 길이
0.375 inches nominal single mounting facility
전체 길이
2.750 inches nominal
전체 높이
2.188 inches nominal
전체 너비
1.625 inches maximum
첫번째 편평한 길이
0.312 inches nominal single actuator
플랫 높이
0.209 inches minimum and 0.229 inches maximum single actuator
샤프트 직경
0.248 inches minimum and 0.251 inches maximum single actuator
샤프트 길이
0.500 inches nominal single actuator
Nonturn 장치 반경
0.531 inches nominal at 12:00 o'clock
개인 단면도 양
2
Nonturn 장치 유형
tab at 12:00 o'clock
작동 온도 범위
-65.0 to 125.0 celsius
스위치 접촉 Basic 디자인
nonpile-up symmetrical
폴란드 양
1 each section rear
Throw 수량
11 each section rear
설치 방법
threaded bushing single mounting facility
공칭 나사 크기
0.375 inches single mounting facility
볼트에 있는 접촉 전압 등급
300.0 ac at sea level
볼트에 있는 접촉 전압 등급
30.0 dc at sea level
Switch Actuator 인덱싱 위치 수량
12 single actuator
샤프트 유형
round, flatted single actuator
끝 유형
tab, solder lug
연락처 Switching Action
breaks before makes each section rear
Switch Actuator 위치 변경
30.0 degrees single actuator
연락처 토크 범위
+1.750 to 6.000 inch-pounds single actuator
Switch 액추에이터 정지 장치 유형
adjustable stop single actuator
접촉 짐 현재 등급
50.0 milliamperes inductive load and 500.0 milliamperes resistive load dc at sea level
접촉 짐 현재 등급
50.0 milliamperes resistive load ac at sea level
귀중한 자료 및 위치
clips and rotor blades silver
귀중한 재료
silver
스타일 지정자
circular wafer, bushing mount
나사 시리즈 지정자
unef single mounting facility

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A052B0
Precious Metals Indicator
S - Item contains silver.
Pseudo Item Name Code
0002134
Hazardous Material Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Schedule B Code
8536509020

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
XX
National Motor Freight Classification Item Number
061360
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
34430
National Motor Freight Class Rating
M - 85.0
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
Z - No special type of cargo code applicable
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
coils/yokes focus/deflection tv

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 67607DH2C

What is the FSCG of the NSN 5930-00-713-8433?
The FSCG of the NSN 5930-00-713-8433 is 5930
Does the NSN 5930-00-713-8433 have a Schedule B code assigned?
Yes, the Schedule B code is 8536509020
Does NSN 5930-00-713-8433 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5930-00-713-8433 contain precious materials?
Item contains silver.
Does NSN 5930-00-713-8433 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5930-00-713-8433 was assigned to the Federal Catalog?
It was assigned 63년 전, on Tue, Jan 1, 1963

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

TP7244
5305-00-272-6221
Setscrew
TP7260
5930-01-563-3139
Box Switch
TP726A
5120-01-430-4465
Hand Blind Riveter
TP7292
5930-01-653-9597
Electrical Switch Cover
TP730
5120-00-293-2503
Rivet Bucking Bar
TP733009-1-G
2090-01-605-3043
Bow Skirt
TP736
5120-01-335-3584
Rivet Bucking Bar
TP74
5120-00-221-1597
Sheet Holder Forceps
TP7450
6210-01-622-0422
Lighting Fixture
TP74712
5360-00-526-3852
Extension Helical Spring
TP75
5950-00-936-5920
Radio Frequency Transformer
TP75-1/8
5120-01-343-9577
Hole Sheet Metal Holder
TP75-3/16
5120-01-343-5069
Hole Sheet Metal Holder
TP75-3/32
5120-00-242-3789
Hole Sheet Metal Holder
TP75-5/32
5120-01-343-5070
Hole Sheet Metal Holder