1. 시작 /
  2. 목록 /
  3. 회사연혁 /
  4. 5905-01-439-5690 /
  5. M55342K04B3E16R

M55342K04B3E16R

Resistor,chip,fixed,film

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. M55342K04B3E16R, NSN 5905-01-439-5690

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

M55342K04B3E16R
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5905 회사연혁
국가 재고 번호
5905-01-439-5690
품목 이름 코드
67164
배정 날짜
12/12/1996 (29년 전)

나사산 부분이 하나의 공칭 지름이고, 나사산이 없는 부분이 하나 이상의 위치에서 또는 전체 길이에 걸쳐 나사산의 최소 피치 지름보다 작은 최대 지름까지 가공되거나 연마된 외부 나사산 조임쇠(제외: 나사산 릴리프를 위한 언더컷). 10번(0.190인치)입니다. (5mm) 이상이며 삽입된 드라이버로 잡거나 구동하도록 설계되지 않았거나 엄지와 손가락으로 회전하도록 설계되지 않은 헤드가 있습니다. 잠금 기능은 헤드 또는 나사산의 설계에 통합될 수 있습니다. 제외 : 볼트, 내부 렌치 및 나비 나사. 스크류, 외부 릴리프 본체 참조.

-1.000 to 1.000 resistance tolerance in percent, 150.0 ambient temp in deg celsius at zero percent rated power, 70.0 ambient temp in deg celsius at full rated power, uninclosed inclosure method, 3.160 kilohms electrical resistance

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

전기 저항
3.160 kilohms
Percent에 있는 저항 포용력
-1.000 to 1.000
Deg Celsius에 있는 주위 임시 직원 가득 차있는 정격 출력
70.0
0 퍼센트 정격 출력에 deg 섭씨에 있는 주위 임시 직원
150.0
Inclosure 방법
uninclosed
끝 유형
terminal type per body style
Reliability 지시자
established
Percent에 있는 신뢰성 실패 비율 수준
0.010
본체 길이
0.045 inches minimum and 0.060 inches maximum
몸 폭
0.145 inches minimum and 0.155 inches maximum
몸 고도
0.010 inches minimum and 0.040 inches maximum
와트에 있는 힘 분산 등급
0.150 free air
스타일 지정자
termination pad each end
테스트 데이터 문서
"81349-mil-r-55342 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
사양/표준 데이터
81349-mil-r-55342/4 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Automatic Data Processing Point
0 - Represents items with no adp components
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A001A0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0067164
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Schedule B Code
8533100042

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TH
National Motor Freight Classification Item Number
062960
National Motor Freight Classification Sub-Item Number
X
Uniform Freight Classification Item Number
35140
National Motor Freight Class Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
3 - Electrostatic sensitive device (esd)
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
reostats/parts noi

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. M55342K04B3E16R

What is the FSCG of the NSN 5905-01-439-5690?
The FSCG of the NSN 5905-01-439-5690 is 5905
Does the NSN 5905-01-439-5690 have a Schedule B code assigned?
Yes, the Schedule B code is 8533100042
Does NSN 5905-01-439-5690 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5905-01-439-5690 contain precious materials?
Item does not contain precious metal.
Does NSN 5905-01-439-5690 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5905-01-439-5690 was assigned to the Federal Catalog?
It was assigned 29년 전, on Thu, Dec 12, 1996

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

2005T72P01
5365-01-420-4354
Shim
2005T76P01
2805-00-887-2020
Piston Ring
2005T76P02
2805-00-887-2044
Piston Ring
2005T76P03
2840-00-172-4437
Aircraft Gas Turbine En Air Seal
2005T76P06
2805-00-100-5018
Piston Ring
2005T76P07
4310-01-281-3795
Piston Ring
2005T78P01
2840-00-885-0672
Flowmeter Support
2005T79P01
5307-00-003-7214
Welding Stud
2005T81P01
5340-00-763-4581
Retaining Strap
2005T81P02
5340-00-763-4582
Retaining Strap
2005T83P01
5365-00-055-1523
Plate Spacer
2005T85P01
5330-00-114-0071
Gasket
2005T92
5970-00-007-0562
Washer Insulator
2005T92P01
5970-00-007-0562
Washer Insulator
2005T93P01
2840-00-936-4744
Engine Bracket