5905-01-026-2143
Resistor,variable,nonwire Wound,
Find complete technical information, availability, and procurement data for NSN 5905-01-026-2143 All details are based on official government and industry records to support accurate and compliant procurement.
슬라이딩 또는 롤링 접점이 저항 소자의 노출된 영역 위로 이동하여 출력의 옴 값을 변경하는 저항기입니다. 출력의 기능적 허용 오차(선형성)가 주어지면 선형 출력에서 플러스 또는 마이너스 1%보다 큽니다. 사인(sine), 코사인(cosine), 탄젠트(tangent) 등과 같은 지정된 출력은 정밀도로 간주되어야 합니다. 사용하기 전에 설정 및 고정되도록 설계된 수동 배치 탭이 있는 품목은 조정 가능한 저항을 참조하십시오. 단계별 변동이 있는 항목에 대해서는 가변 저항기 및 저항기를 단계별로 참조하십시오. 감쇠기로 함께 작동하도록 설계된 탠덤 장착 품목에 대해서는 감쇠기, 변수를 참조하십시오. 제외 : 저항기 (1), 가변, 권선, 비정밀도; 저항기(1), 가변, 비와이어 권선 정밀도; 및 저항기 (1), 변수, 권선, 정밀도.
1 section quantity, rectangular body style, 0.100 reliability failure rate level in percent, established reliability indicator, 0.300 inches minimum terminal length
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- 단면도 양
- 1
- 몸 작풍
- rectangular
- Reliability 지시자
- established
- Percent에 있는 신뢰성 실패 비율 수준
- 0.100
- 끝 길이
- 0.300 inches minimum
- 샤프트 직경
- 0.075 inches nominal
- 샤프트 길이
- 0.080 inches maximum
- 본체 길이
- 0.420 inches maximum
- 몸 폭
- 0.170 inches nominal
- 몸 고도
- 0.375 inches nominal
- 샤프트 스타일
- round, slotted
- Actuator 유형
- single shaft
- Deg Angular Rotation의 효과적인 전기 회전
- 5400.0 minimum and 10800.0 maximum
- 터미널 사이의 Center To Center Distance
- 0.200 inches nominal
- 설치 방법
- terminal
- 단면도 당 전기 저항
- 25.0 kilohms single section
- 로터리 액츄에이터 트래블 인 앵귤러 데그 (Angular Deg)
- 5400.0 minimum and 10800.0 maximum
- Center To Center Center Terminal 및 Outside Terminal 사이의 거리
- 0.100 inches nominal
- 주위 임시 직원에 있는 deg 섭씨 0 퍼센트 정격 출력에 단면도 당
- 150.0 single section
- 터미널 위치
- rear end
- 섭씨 deg 당 Ppm에 있는 단면도 당 저항의 임시 직원 계수
- -100.0 to 100.0 single section
- 와트에 있는 단면도 당 힘 분산 등급
- 0.5 free air single section
- 저항 Percent에 있는 단면도 당 포용력
- -10.0 to 10.0 single section
- 액추에이터 여행 통제 특징
- clutch
- 주변 온도: 섭씨 deg 전체 정격 전력에서 섹션 당
- 85.0 single section
- 테스트 데이터 문서
- "81349-mil-r-39035 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 끝 유형과 양
- 3 pin
- 사양/표준 데이터
- 81349-mil-r-39035/2 government specification
관련 부품 및 사양
이 NSN에는 특정 운영 요구에 맞게 설계된 다양한 관련 부품이 포함되어 있습니다. 아래의 각 항목을 검토하여 올바른 적용 및 교체를 위한 심층적인 사양, 기능 세부 정보 및 지침을 찾으십시오.
| 부품 번호 | 이름 |
|---|---|
| 380-9084-290 | Resistor,variable,nonwire Wound, |
| RJR24FX253P | Resistor,variable,nonwire Wound, |
| RJR26FX253M | Resistor,variable,nonwire Wound, |
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Source of Supply
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- Schedule B Code
- 1 - Full descriptive item identification
- S9E - Defense supply center columbus, columbus, oh 43218
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
- A002A0
- U - Precious metal content is unknown
- 0037405
- N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- 8533400080
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- TX
- 062960
- X
- 35140
- P - 77.5
- 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- HZ -
- reostats/parts noi
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 5905-01-026-2143
What is the FSCG of the NSN 5905-01-026-2143?
Does the NSN 5905-01-026-2143 have a Schedule B code assigned?
Does NSN 5905-01-026-2143 require demilitarization?
Does NSN 5905-01-026-2143 contain precious materials?
Does NSN 5905-01-026-2143 contain hazardous materials?
When the NSN 5905-01-026-2143 was assigned to the Federal Catalog?
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.