LO1144
Gasket
이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. LO1144, NSN 5330-01-443-1961
자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.
Defense Mapping Agency와 같은 기관에서 배포하는 지도, 차트 또는 측지 제품으로, 육상 항법, 추적 및 차트 작성과 관련이 있습니다.
19.400 inches nominal overall length, 0.500 inches nominal overall width, 0.093 inches nominal cross-sectional thickness, solid single or composition cross-sectional shape style, 45.0 shore durometer a nominal overall hardness rating
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- 단면 모양 스타일
- solid single or composition
- 전체 길이
- 19.400 inches nominal
- 전체 너비
- 0.500 inches nominal
- 단면 두께(Cross-Sectional Thickness)
- 0.093 inches nominal
- 경도 등급
- 45.0 shore durometer a nominal overall
- 재료
- rubber neoprene overall
- 재료 문서 및 분류
- mil-r-900 mil spec single material response overall
- 특별 테스트 기능
- special quality control testing
- 테스트 데이터 문서
- "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Automatic Data Processing Point
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- 4 - Partial descriptive item identification (type 1 concept)
- 0 - Represents items with no adp components
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- S - The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
- A032A0
- A - Item does not contain precious metal.
- 0004522
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- KZ
- 194120
- Z
- 95100
- W - Rating variable
- 596 - Gaskets, (machinery and parts),(less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- BZ -
- washers/gaskets/pckg dvcs noi
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. LO1144
What is the FSCG of the NSN 5330-01-443-1961?
Does NSN 5330-01-443-1961 require demilitarization?
Does NSN 5330-01-443-1961 contain precious materials?
Does NSN 5330-01-443-1961 contain hazardous materials?
When the NSN 5330-01-443-1961 was assigned to the Federal Catalog?
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.