5330-01-443-1326
Gasket
Find complete technical information, availability, and procurement data for NSN 5330-01-443-1326 All details are based on official government and industry records to support accurate and compliant procurement.
연방 공급 그룹
Hardware and Abrasives
연방 공급 분류
5330 패킹과 틈막이 물자
국가 재고 번호
5330-01-443-1326
품목 이름 코드
04522
배정 날짜
04/02/1997 (29년 전)
볼 베어링, 플레인 베어링 또는 롤러 베어링이 없는 단일 또는 다중 부품 제품입니다. 다양하거나 특정한 장착 조건을 충족하도록 설계되었습니다. 베어링이 있는 제품은 베어링 유닛(볼), 베어링 유닛(플레인), 베어링 유닛(롤러)을 참조하십시오.
solid single or composition cross-sectional shape style, 0.093 inches nominal cross-sectional thickness, zzzy criticality code justification, 15.200 inches nominal overall length, 0.500 inches nominal overall width
특성
다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.
- 단면 모양 스타일
- solid single or composition
- 전체 길이
- 15.200 inches nominal
- 전체 너비
- 0.500 inches nominal
- 단면 두께(Cross-Sectional Thickness)
- 0.093 inches nominal
- 중요도 코드 정당화
- zzzy
- 재료
- rubber neoprene overall
- 재료 문서 및 분류
- mil-r-900 mil spec single material response overall
- 특별 테스트 기능
- special quality control testing
- 테스트 데이터 문서
- "81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
- 참조 번호 차별화 특성
- as differentiated by material which must conform to ships parts control center special quality control provisions
관련 부품 및 사양
이 NSN에는 특정 운영 요구에 맞게 설계된 다양한 관련 부품이 포함되어 있습니다. 아래의 각 항목을 검토하여 올바른 적용 및 교체를 위한 심층적인 사양, 기능 세부 정보 및 지침을 찾으십시오.
| 부품 번호 | 이름 |
|---|---|
| 100H231 PIECE 138 | Gasket |
| 1082H94H26 | Gasket |
| LL-HX0-4821 | Gasket |
| LO1132 | Gasket |
Classification Data
Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.
- Type of Item Identification
- Automatic Data Processing Point
- Demilitarization
- Criticality
- Federal Item Identification Guide
- Precious Metals Indicator
- Pseudo Item Name Code
- Hazardous Material Indicator
- N - Partial descriptive - reference - descriptive item identification (type 1b concept)
- 0 - Represents items with no adp components
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- S - The item is a non-aviation critical safety item (csi) whose failure will result in serious damage to equipment or serious injury or death to personnel.
- A032A0
- A - Item does not contain precious metal.
- 0004522
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Freight Information
Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.
- Major Organizational Entity
- National Motor Freight Classification Item Number
- National Motor Freight Classification Sub-Item Number
- Uniform Freight Classification Item Number
- National Motor Freight Class Rating
- Water Commodity
- Type of Cargo
- Special Hand
- Air Dimension
- Air Commodity
- National Motor Freight Description
- KZ
- 194120
- Z
- 95100
- W - Rating variable
- 596 - Gaskets, (machinery and parts),(less than 35 feet)
- Z - No special type of cargo code applicable
- 9 - Other or no special handling required (sh)
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- BZ -
- washers/gaskets/pckg dvcs noi
자주 묻는 질문(FAQ)
설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. 5330-01-443-1326
What is the FSCG of the NSN 5330-01-443-1326?
The FSCG of the NSN 5330-01-443-1326 is 5330
Does NSN 5330-01-443-1326 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5330-01-443-1326 contain precious materials?
Item does not contain precious metal.
Does NSN 5330-01-443-1326 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
When the NSN 5330-01-443-1326 was assigned to the Federal Catalog?
It was assigned 29년 전, on Wed, Apr 2, 1997
당신을 위한 추천
카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.
가격 및 재고
양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.
FREE
