1. 시작 /
  2. 목록 /
  3. 전자 현미경 /
  4. 5962-01-288-6899 /
  5. JM38510/17001BCA

JM38510/17001BCA

Digital Microcircuit

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. JM38510/17001BCA, NSN 5962-01-288-6899

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

JM38510/17001BCA
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5962 전자 현미경
국가 재고 번호
5962-01-288-6899
품목 이름 코드
31779
배정 날짜
11/11/1988 (37년 전)

정보 및 / 또는 코딩 지침을 저장하도록 설계된 회로. 항목에는 컴퓨터 또는 컴퓨팅 장치에서 설치하기 위해 핀 또는 기타 연결이 있습니다. 마그네틱 드럼, 테이프, 펀치 카드 또는 같은 포함하지 않습니다. 휴대용 유형 연결이 있는 품목을 위해 기억, 휴대용, 단단한 국가를 보십시오.

-55.0 to 125.0 celsius operating temp range, 0.220 inches minimum and 0.310 inches maximum body width, 0.785 inches maximum body length, 0.185 inches maximum body height, 200.0 milliwatts maximum power dissipation rating

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

본체 길이
0.785 inches maximum
몸 폭
0.220 inches minimum and 0.310 inches maximum
몸 고도
0.185 inches maximum
최대 힘 Dissipation 등급
200.0 milliwatts
작동 온도 범위
-55.0 to 125.0 celsius
보관 온도 범위
-65.0 to 175.0 celsius
제공되는 기능
monolithic and hermetically sealed
인클로저 재료
ceramic
설정 설치
dual-in-line
Output Logic Form
complementary-metal oxide-semiconductor logic
입력 회로 패턴
quad 2 input
디자인 기능 및 양
4 gate, and
Case Outline Source And Designator
d-1 mil-m-38510
끝 표면 처리
solder
전압 등급과 유형 특성 당
-0.5 volts maximum power source and 18.0 volts maximum power source
Chacteristic당 시간 등급
350.00 nanoseconds maximum propagation delay time, low to high level output and 350.00 nanoseconds maximum propagation delay time, high to low level output
테스트 데이터 문서
"81349-mil-m-38510 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
끝 유형과 양
14 printed circuit
사양/표준 데이터
81349-mil-m-38510/170 government specification

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Automatic Data Processing Point
0 - Represents items with no adp components
Demilitarization
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A458A0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0031779
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Schedule B Code
8542900000

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061700
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34580
National Motor Freight Class Rating
W - Rating variable
Less than Car Load Rating
P - 77.5
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
3 - Electrostatic sensitive device (esd)
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
elec appliances/instruments noi

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. JM38510/17001BCA

What is the FSCG of the NSN 5962-01-288-6899?
The FSCG of the NSN 5962-01-288-6899 is 5962
Does the NSN 5962-01-288-6899 have a Schedule B code assigned?
Yes, the Schedule B code is 8542900000
Does NSN 5962-01-288-6899 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 5962-01-288-6899 contain precious materials?
Item does not contain precious metal.
Does NSN 5962-01-288-6899 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5962-01-288-6899 was assigned to the Federal Catalog?
It was assigned 37년 전, on Fri, Nov 11, 1988

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

K753G62612
7643-01-604-2381
Topographic Geospatial Products
K753G62613
7643-01-604-2382
Topographic Geospatial Products
K753G62614
7643-01-604-2383
Topographic Geospatial Products
K753G63451
7643-01-604-2384
Topographic Geospatial Products
K753G63481
7643-01-609-4873
Topographic Geospatial Products
K753G63492
7643-01-609-4879
Topographic Geospatial Products
K753G63493
7643-01-609-4878
Topographic Geospatial Products
K753G63494
7643-01-609-4880
Topographic Geospatial Products
K753G63501
7643-01-609-4881
Topographic Geospatial Products
K753G63502
7643-01-609-4883
Topographic Geospatial Products
K753G63503
7643-01-609-4882
Topographic Geospatial Products
K753G63504
7643-01-609-4884
Topographic Geospatial Products
K753G63513
7643-01-609-4887
Topographic Geospatial Products
K753G63542
7643-01-610-3618
Topographic Geospatial Products
K753G63544
7643-01-610-3620
Topographic Geospatial Products