1. 시작 /
  2. 목록 /
  3. 전자 현미경 /
  4. 5962-01-108-8789 /
  5. SN54S287J/7769-160

SN54S287J/7769-160

Memory Microcircuit

이 페이지는 부품 번호에 대한 완전하고 검증된 정보를 제공합니다. SN54S287J/7769-160, NSN 5962-01-108-8789

자세한 기술 사양, 제품 속성, 상태 분류 및 실시간 재고 가용성을 확인할 수 있습니다. 모든 데이터는 공식 기록을 기반으로 하며 방위, 항공 우주 및 산업 소싱에 대한 업계 표준을 충족합니다. 부품 감사를 수행하든, 규정 준수를 검증하든, 구매 주문을 준비하든 이 부품 목록은 정확하고 효율적인 조달을 지원합니다.

SN54S287J/7769-160
연방 공급 그룹
Electrical and Electronic Equipment Components
연방 공급 분류
5962 전자 현미경
국가 재고 번호
5962-01-108-8789
품목 이름 코드
41015
배정 날짜
03/06/1981 (45년 전)

정보 및 / 또는 코딩 지침을 저장하도록 설계된 회로. 항목에는 컴퓨터 또는 컴퓨팅 장치에서 설치하기 위해 핀 또는 기타 연결이 있습니다. 마그네틱 드럼, 테이프, 펀치 카드 또는 같은 포함하지 않습니다. 휴대용 유형 연결이 있는 품목을 위해 기억, 휴대용, 단단한 국가를 보십시오.

0.155 inches minimum and 0.175 inches maximum body height, -65.0 to 150.0 celsius storage temp range, 0.265 inches minimum and 0.300 inches maximum body width, -55.0 to 125.0 celsius operating temp range, 0.755 inches minimum and 0.785 inches maximum body length

특성

다음은 기술 데이터, 재료 구성 및 규정 준수 정보를 포함하여 이 부품의 공식 사양 및 성능 세부 정보입니다.

본체 길이
0.755 inches minimum and 0.785 inches maximum
몸 폭
0.265 inches minimum and 0.300 inches maximum
몸 고도
0.155 inches minimum and 0.175 inches maximum
작동 온도 범위
-55.0 to 125.0 celsius
보관 온도 범위
-65.0 to 150.0 celsius
제공되는 기능
hermetically sealed and monolithic and positive outputs and programmable and schottky and w/decoded output and 3-state output
인클로저 재료
ceramic and glass
설정 설치
dual-in-line
Output Logic Form
transistor-transistor logic
입력 회로 패턴
10 input
끝 표면 처리
solder
전압 등급과 유형 특성 당
5.5 volts maximum power source
Chacteristic당 시간 등급
25.00 nanoseconds maximum propagation delay time, low to high level output and 25.00 nanoseconds maximum propagation delay time, high to low level output
메모리 장치 제품정보
rom
메모리 용량
unknown
테스트 데이터 문서
13499-351-7769 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
끝 유형과 양
16 printed circuit

Classification Data

Detailed NSN information including identification codes, classification data, and key indicators used for cataloging, logistics, and supply management.

Type of Item Identification
1 - Full descriptive item identification
Automatic Data Processing Point
0 - Represents items with no adp components
Demilitarization
Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Criticality
X - The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Federal Item Identification Guide
A458A0
Precious Metals Indicator
A - Item does not contain precious metal.
Pseudo Item Name Code
0041015
Hazardous Material Indicator
N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Schedule B Code
8542900000

Freight Information

Comprehensive freight classifications, shipping codes, and handling specifications for domestic and international transport compliance.

Major Organizational Entity
TX
National Motor Freight Classification Item Number
061045
National Motor Freight Classification Sub-Item Number
Z
Uniform Freight Classification Item Number
34580
National Motor Freight Class Rating
W - Rating variable
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
Type of Cargo
3 - Electrostatic sensitive device (esd)
Special Hand
9 - Other or no special handling required (sh)
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Air Commodity
HZ -
National Motor Freight Description
boards printed circuit elec

자주 묻는 질문(FAQ)

설치 절차, 작동 조건, 관리 지침, 업계 규정 및 일반적인 문제에 대한 통찰력을 얻으십시오. 아래 FAQ는 다음에 대한 주요 정보를 제공합니다. SN54S287J/7769-160

What is the FSCG of the NSN 5962-01-108-8789?
The FSCG of the NSN 5962-01-108-8789 is 5962
Does the NSN 5962-01-108-8789 have a Schedule B code assigned?
Yes, the Schedule B code is 8542900000
Does NSN 5962-01-108-8789 require demilitarization?
"commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Does NSN 5962-01-108-8789 contain precious materials?
Item does not contain precious metal.
Does NSN 5962-01-108-8789 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 5962-01-108-8789 was assigned to the Federal Catalog?
It was assigned 45년 전, on Fri, Mar 6, 1981

소모품이 필요하십니까?

필수 물품이 부족합니까? 귀하의 작업을 순조롭게 진행하도록 설계된 광범위한 고품질 소모품 카탈로그를 살펴보십시오.

Electrical Wires

당신을 위한 추천

카탈로그에서 수요가 많은 다른 NSN 구성 요소를 찾아보십시오. 이러한 주요 부품은 방위, 항공우주, 산업 부문 전반의 조달 팀에서 자주 공급됩니다.

가격 및 재고

양식을 작성하여 NSN 전문가로부터 정확한 가격, 리드 타임 및 재고 세부 정보를 얻으십시오.

FREE

Aviation Suppliers Association Member AS9120-ISO9001 Certification

인기 부품

고객 수요와 조달 빈도에 따라 선택된 최고 성능의 부품을 찾아보십시오. 모든 목록에는 최신 사양, 가용성 및 상태가 포함됩니다.

347/11086
5975-01-575-7174
Electrical Equipme Mounting Base
347/11088
3040-01-575-3898
Rigid Connecting Link
347-1109-102
5962-00-250-4824
Digital Microcircuit
347/11091
2590-01-574-8789
Stabilizing Spade
347/11092
2590-01-575-4277
Stabilizing Spade
347/11094
2540-01-611-7191
Vehicular Brush Guard
347-111-001
5960-00-456-9035
Electron Tube
347/11107
2590-01-575-4478
Stabilizing Spade
347/11114
5340-01-606-0363
Utility Access Door
347/11125
5340-01-604-8745
Angle Bracket
347/11128
2590-01-574-8793
Lift Blade Arm Assembly
347/11129
2590-01-575-3607
Lift Blade Arm Assembly
347-1131
2815-01-594-3663
Engine Camshaft
347-1133
2815-01-594-3664
Engine Camshaft
347-119
6110-00-966-6195
Electric Brake